Husqvarna 317EL 321EL Chainsaw Owners Manual

MOUNTING GUIDE BAR AND ADJUSTING CHAIN
CAUTION!
Always disconnect  power before performing  cleaning or maintenance  work.
CAUTION!
A loose chain  can jump out of its groove  during operation and  cause serious
or even fatal injury.
6.
Replace the chain  drive cover and screw
the mounting nut  hand tight.
1.
Pull kickback guard  back against the front handle
to ensure that the  chain brake is not applied.
7.
8.
Tension  the  chain  by  screwing  the
tensioning screw clockwise using the
screwdriver  tip  on  the  combination
tool.
2.
Screw out the guide  bar nut and remove
the chain drive  cover.
Tighten chain firmly  but not so hard that it does not  turn easily
by hand force.  Push the button  to release the  chain brake. To
avoid contact  between your  hands and  the chain, use  gloves
to turn the chain.
2
8
3.
Fit the chain around  guide bar nose with
the top cutters  facing forwards.
9.
Tighten the mounting  nut with the combination  tool while hold-
ing the tip of the  guide bar up.
4
.  Holding  the  chain  over  the  guide  bar nose,  position   the
back end  of the  guide bar  against the  drive sprocket  at a
45°
angle to the power head.  Pass the free end of the chain
around the  drive sprocket,  swing  the guide  bar into  place
over  the mounting  bolt  and against  the  power  head, and
guide the chain  into the guide bar groove.
The tension of a  new chain must be checked  frequently until it
is broken in. Continue  to check the tension at  regular intervals
to ensure good performance  and a long service  life.
Wear  causes  a  chain   to  become  looser  with  use.   Regular
tensioning is important  to compensate for  this wear.
5
. Seat the guide  bar tensioner pin in its hole  in the guide bar.
Check the chain  tension at least  every time you refill the  chain
oil reservoir.
10
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags,
Model Year2004, 2005, 2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 16 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website