Husqvarna 317EL 321EL Chainsaw Owners Manual

CHAIN AND GUIDE BAR LUBRICATION
CAUTION!
Inadequate lubrication  can lead to cutting  equipment failure and  serious or fatal
personal injury.
Chain oil
A full reservoir is  sufficient for 20 minutes  of steady use.
The  chain  and  bar  are lubricated   by an  automatic  oiling
system. We  recommend using  only chain saw  oil, which is
formulated for good adhesion and flow characteristics in hot
or cold weather.  Nonetheless, it is  important to use  the vis-
cosity appropriate to the season. Oil thickens in subfreezing
temperatures  and  can  overload  the  oil pump  and  cause
parts to fail.
If the lubrication  system does not  seem to be working,  and
the following steps do not help, take your saw to a service
dealer.
-
Check the guide bar’s oil passage
and clean if necessary.
As  a manufacturer  of  chain saws,  we  have developed  an
ideal  chain  oil  which,  being  based  on  vegetable  oils,  is
completely  biodegradable.  We recommend  our  oil for  the
sake  of your  chain  and guidebar  and  for  the sake  of  the
environment.
-
Check   guide   bar   groove    and
clean if necessary.
Where chain oil is not available, EP 90  gear oil may be used.
If you need help choosing chain oil, contact your service dealer.
Never use old motor oil! Used motor oil contains impurities
which may be harmful  to oil pump, guide bar and chain.
-
Ensure  that   the  nose   sprocket
turns easily  and is  not  clogged.
Clean  and  grease  if  necessary.
Filling chain oil
All our chain saw models feature automatic chain lubrication.
Checking chain wear
Inspect chain every  day for:
-
Visible cracks in  rivets or links
Stiffness
Checking automatic chain lubrication system
-
-
-
-
Start the chain saw  and point the guide bar towards  a fixed,
light-coloured object  at a distance of  approximately 20 cm.
After  running the  saw for  a minute,  a  streak of  oil spatter
should be clearly visible  on the light surface.
Abnormal wear  in rivets or links
Min. 3 mm (1/8”)  horizontal cutter length
Any deviation  on any  of these points  indicates a  worn chain which
must be discarded
12
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags,
Model Year2004, 2005, 2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 16 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website