Poulan 2550T Chainsaw Owners Manual

Cutters
Depth Gauge
Chain Adjustment
Tool (Bar Tool)
Chain Brake Nuts
Drive Links
Adjusting the tension:
Chain  tension  is  very  important.
Chain
stretches during use. This is especially true
during the first few times you use your saw.
Always check chain tension each  time you
use and refuel your saw.
You can adjust the chain tension by loosen-
ing the chain brake nuts and turning the ad-
justing screw 1/4 of a turn while lifting up on
the bar.
Place chain onto the sprocket
S  Ifchainistootight,turnadjustingscrew1/4
turn counterclockwise.
7.
8.
Place chain over and behind clutch, fitting
the drive links in the clutch drum sprocket.
Fit  bottom of  drive  links  between the
teeth in the sprocket in  the nose of the
guide bar.
Fit chain drive links into bar groove.
Pull guide bar forward until chain is snug
inguidebargroove.Ensurealldrivelinks
are in the bar groove.
S  If chain is too loose, turn adjusting screw
1/4 turn clockwise.
Adjusting
Screw
9.
10.
11.
12.
Now, install chain brake making surethe
adjusting pin is  positioned in the  lower
hole inthe guidebar.  Remember this pin
moves the bar forward and backward as
the screw is turned.
Guide Bar
Chain Brake Nuts
Adjusting Screw -- 1/4 Turn
Installchainbrakenutsandfingertighten
only. Once the  chain is tensioned, you
will need to tighten chain brake nuts.
S  Lift up the tip of the bar and securely tight-
en the chain brake nuts with the bar tool.
CHAIN  TENSION  (Including units  with
chain already installed)
S
Recheck chain tension.
NOTE:  When   adjusting   chain  tension,
make sure the chain  brake nuts are finger
tight only.   Attempting to tension the  chain
when  the chain  brake  nuts are  tight  can
cause damage.
Chain Brake
Nuts
Checking the tension:
Use the screwdriver end of the chain adjust-
menttool(bar  tool) tomovethe chainaround
the bar. If the chain does not rotate, it is too
tight.Iftooloose,   thechainwillsagbelowthe
bar.
WARNING:
If the saw is operated
with a loose chain, the chain could jump off
the guide bar and result in serious injury.
7
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 18 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website