6.
Place the chain over and behind the
clutch, fitting the drive links in the clutch
drum sprocket.
Adjusting the tension:
Chain tension is very important.
Chain
stretches during use. This is especially true
during the first few times you use your saw.
Always check chain tension each time you
use and refuel your saw.
An adjusting screw (located on the guide bar)
is used to adjust the tension of the chain (see
illustration).
S Turn adjusting screw clockwise untilchain
Place chain onto the sprocket
solidly contacts bottom of guide bar rail.
Guide bar
7.
Fit bottom of drive links between the
teeth in the sprocket in the nose of the
guide bar.
8.
9.
Fit chain drive links in to bar groove.
Pull the bar forward until the chain is
snug in the groove of the bar. Ensureall
drive links are in the bar groove.
Hold guide bar against the saw frame
and install the chain brake.
Adjusting
Screw
10.
11.
S Using the screwdriver end of the bar tool,
roll chain around guide bar to ensure all
links are in bar groove.
Replacethechainbrakenuts andtighten
finger tight. Once the chainistensioned
you will needto tightenchain brakenuts.
S Liftuptipofguidebar tocheck forsag. Re-
lease tip of guide bar, then turn adjusting
screw until sag does not exist.
CHAIN TENSION (Including units with
chain already installed)
NOTE: When adjusting chain tension,
make sure the chain brake nuts are finger
tight only. Attempting to tension the chain
when the chain brake nuts are tight can
cause damage.
S Tighten bar clamp nuts securely with the
bar tool.
Chain Brake
Nuts
Checking the tension:
Use the screwdriver end of the chain adjust-
menttool(bar tool) tomovethe chainaround
the bar. If the chain does not rotate, it is too
tight. Iftooloose,thechainwillsagbelowthe
bar.
S
Use the screwdriver end of the bar tool to
move chain around guide bar.
S If chain does not rotate, it is too tight.
Slightly loosen bar clamp nuts and loosen
chain by turning the adjusting screw. Re-
tighten bar clamp nuts.
S If chain is too loose, it will sag below the
guide bar. DO NOT operate the saw if the
chain is loose.
WARNING:
If the saw is operated
Chain Adjustment
Tool (Bar Tool)
with a loose chain, the chain could jump off
the guide bar and result in serious injury.
Chain Brake Nuts
7
| Categories | Chainsaw Manuals, Poulan Pro Chainsaw Manuals |
|---|---|
| Tags | Poulan Pro 220, Poulan Pro 260 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)