Lubricating the Self-propel
Drive
7. Start the engine again to ensure that all the gasoline is
out of the carburetor.
Folding the Handle
1.
Wipe the grease fittings on the rear cutting height levers
with a clean rag (Fig. 24).
Warning
Folding or unfolding the handle improperly can
pinch, stretch, or damage one or more of the
cables. Any pinched, stretched, or damaged cable
may cause an operational failure that results in an
unsafe operating condition.
1
276
Figure 24
1.
Grease fitting (2)
•
•
Do not pinch, stretch, or damage the cables.
Handle the cables with care when folding or
unfolding the handle.
Do not use the lawn mower if one or more of the
cables are pinched, stretched, or damaged.
Contact an Authorized Service Dealer.
2.
Install a grease gun onto each fitting in turn and gently
apply one or two pumps of #2 multi-purpose lithium
grease to each.
•
Important
Excess grease may prevent the wheel clutch
operation from properly operating.
Important
Do not remove or loosen the knobs that
secure the the lower handle to the swing bracket. Do not
fold the upper handle backward.
Cleaning under the Belt Cover
1.
2.
Loosen the knobs that secure the upper handle section.
Keep the area under the belt cover free of debris.
Carefully swing the upper handle section forward until
it rests on the engine (Fig. 25).
1.
2.
Stop the engine and wait for all moving parts to stop.
Remove the bolts that secure the belt cover to the
housing (Fig. 21).
3.
4.
Lift off the cover and brush out all the debris from the
belt area.
Install the belt cover.
m-4217
Figure 25
Cleaning the Cooling System
After every 100 operating hours or every season, clean the
dirt and the chaff from the cylinder, the cylinder head fins,
and around the carburetor and the linkage. Remove debris
from the air intake slots on the recoil housing. This will
ensure proper cooling and the best engine performance.
Emptying the Fuel Tank
1.
Stop the engine and wait for it to cool.
Drain gasoline from a cold engine only.
Important
2.
3.
4.
Disconnect the wire from the spark plug (Fig. 7).
Remove the cap from the fuel tank (Fig. 5).
Use a hand pump to pump the gasoline into a clean
approved gasoline container.
5.
6.
Connect the wire to the spark plug.
Run the engine until it stops.
18
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 20036, Toro 20037 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | Español |
| Serial Number | toro_wbmdrsys.pdf | 88 | Lawn-Boy Walk Power Mower Drive Systems |
| Product Name | Toro Super Recycler Mower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro 21" (53cm) 3 in 1 / Recycler |
| Swath | 21 inch |
| Discharge | Recycler |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 30w or 10w-30 / API SH or higher |
| Engine Motor Model # | 123K02-0114-E1 |
| Engine Motor Size | 6.5 hp |
| Engine Motor Type | 4 Cycle EPA1 |
| Transmission Speed | Personal Pace |
| Transmission Type | Gear |
| Spark Plug | Champion RJ19LM |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 20036 20037 21-Inch Super Recycler Lawn Mower Operators Manual, 2004 5.0 out of 5.0 based on 1 product reviews. This has been a great mower. Just looking for replacement parts from normal wear