4
Installing the Blade
5
1.
Install the blade onto the spindle and the blade driver
with the curved blade tips pointing toward the lawn
mower deck and the blade driver nesting in the recess
of the blade (Fig. 19).
3
2.
3.
Install the accelerator, the lock washer, and the blade
bolt (Fig. 19).
2
Tighten the blade bolt to 50 ft-lb (68 Nm).
1
1627
Figure 19
WARNING
1.
2.
3.
Blade bolt
4.
5.
Blade
Lock washer
Accelerator
Blade driver
POTENTIAL HAZARD
• Operating the lawn mower without the
accelerator in place can cause the blade to flex,
bend, or break.
WHAT CAN HAPPEN
Sharpening the Blade
•
A broken blade could cause serious injury or
death to the operator or bystanders.
File the top side of the blade to maintain its original
cutting angle (Fig. 20A) and inner cutting edge radius
(Fig. 20B).
HOW TO AVOID THE HAZARD
•
Do not operate the lawn mower without the
accelerator.
A
B
2
1
Lubricating the Self-propel
Drive
153
m-4783
Figure 20
1.
Sharpen at this angle only
2. Maintain the original
radius here
1.
Wipe the grease fittings on the rear wheel height
adjustment levers with a clean rag (Fig. 22).
Note: The blade will remain balanced if you remove the
same amount of material from both cutting edges.
Balancing the Blade
1.
Check the balance of the blade by placing the center
hole of the blade over a nail or a screwdriver shank
clamped horizontally in a vise (Fig. 21).
1
276
Figure 22
1.
Grease fitting
2.
Install a grease gun onto each fitting in turn and gently
apply one or two pumps of #2 multi-purpose lithium
grease to each.
1007
Figure 21
IMPORTANT: Excess grease may prevent the wheel
clutch operation from properly operating.
Note: You can also check the balance by using a
commercially manufactured blade balancer.
Adjusting the Self-propel Drive
Cable
2.
If either end of the blade rotates downward, file that
end (not the cutting edge or the end near the cutting
edge). The blade is properly balanced when neither
end drops.
If the top speed begins to slow down on the lawn mower,
adjust the self-propel drive cable.
17
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro 20040 |
Model Year | 2004 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)