20
Storage
Removing the Snowthrower
from Storage
1.
rapidly using the starter to blow the excess oil from
the cylinder.
Remove the spark plug and spin the engine
Warning
GasolineS vapors can explode.
2.
to 15 ft-lb (20.4 N m).
Install the spark plug by hand and then torque it
S
S
DoDo notnot storestore gasolinethe snowmorethrowthaner in 30an days.enclosure
nearAllowanthopene engiflame.ne to cool before storing it.
3.
4.
given in the Recommended Maintenance Schedule
on page 15.
Connect the spark plug wire.
Perform the annual maintenance procedures as
Preparing the Snowthrower
for Storage
1.
On the last refueling of the year, add fuel
stabilizer to fresh fuel as directed by the engine
manufacturer.
2.
conditioned fuel through the fuel system.
Run the engine for 10 minutes to distribute the
3.
to the valve and slide the fuel line off the fuel shutoff
valve.
Loosen the hose clamp that secures the fuel line
4.
Open the fuel shutoff valve and allow the fuel to
drain out of the fuel tank into an approved fuel
container.
5.
Install the fuel line onto the fuel shutoff valve and
secure it with a hose clamp.
6.
Run the snowthrower until the engine stops from
running out of fuel.
7.
8.
Prime the engine and start it again.
Allow the engine to run until it stops. When you
can no longer start the engine, it is sufficiently dry.
9.
Stop the engine and allow it to cool.
Remove the ignition key.
10.
11.
12.
Disconnect the spark plug wire.
Remove the spark plug, add 1 oz. (30 ml) of oil
through the spark plug hole, and pull the starter rope
slowly several times to distribute oil throughout the
cylinder to prevent cylinder corrosion during the
off-season.
13.
Loosely install the spark plug.
14.
Dispose of any unused fuel properly. Recycle it
according to local codes, or use it in your automobile.
Note: Do not store stabilized fuel for more than
90
days.
15.
16.
Clean the snowthrower thoroughly.
Tighten all loose screws, bolts, and locknuts.
Repair or replace any damaged parts.
3329-776
Rev A
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38642, Toro Power Max 1028LE |
| Model Number | 38642 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Name | Toro Power Max 1028 LE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | HMSK100-159494Y |
| Engine Motor Size | 10 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)