8
Installing the Chute Control
Rod
8.
cable clip (A) that
supports the
Insert the
deflector cable (B)
onto the forward
carriage bolt, and
secure the carriage
bolts with locknuts
from the loose
1.
Stick.
Remove the packaging materials from the Quick
B
2.
Stick so that it is upright and in the center.
From the operating position, rotate the Quick
A
3.
the lever fully rearward.
Press and hold the blue trigger cap down and pull
parts bag.
9.
Press and hold the blue trigger cap down to
Note: The discharge chute and deflector should
face forward. If they do not, press and hold the
blue trigger cap down (but do not move the Quick
Stick), and reach forward and rotate the discharge
chute until it faces directly forward.
unlock the Quick Stick.
10.
Rotate the Quick Stick in a circle to ensure that
the chute and deflector operate smoothly.
4.
Align the flattened back end of the long chute
Connecting the Wire to the
Headlight
control rod (A) with the flattened front end of the short
rod (B) that extends from the front of the control panel
so that they nest together.
1.
Insert the wire connector on the loose end of the
wire straight into the back of the headlight until it is
securely in place.
m-6973
A
B
m-6969
5.
Hold the long
chute control rod in
this orientation
(you must move it
back to insert it
into the gear) and
insert the front end
of the rod into the
opening in the
m-7011
Note: Ensure that the plastic clip on the wire
back of the chute
gear cover until it
slides into the
connector is on the bottom.
2.
Secure a cable tie (from the loose parts bag)
around the wire and the handle about an inch
chute gear.
(2.5
cm) below the U-bolt.
6.
Align the holes in the nested ends of the rods and
insert 2 carriage bolts through the short rod from the
left side of the snowthrower (as viewed from the
operating position).
7.
go through the holes in the short rod and then through
the holes in the long chute control rod.
The 2 carriage bolts (in the loose parts bag) will
3329-776
Rev A
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38642, Toro Power Max 1028LE |
| Model Number | 38642 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Name | Toro Power Max 1028 LE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | HMSK100-159494Y |
| Engine Motor Size | 10 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)