18
Removing the Snowthrower
from Storage
1.
Remove the spark plug and spin the engine
rapidly using the starter to blow the excess oil from
the cylinder.
2.
to 15 ft-lb (20.4 N m).
Install the spark plug by hand and then torque it
3.
4.
Connect the spark plug wire.
Perform the annual maintenance procedures as
given in the Recommended Maintenance Schedule
on page 13.
Troubleshooting
Toro designed and built your snowthrower for trouble-free operation. Check the following components and items
carefully, and refer to Maintenance on page 13 for more information. If a problem continues, see an Authorized
Service Dealer.
Problem
Possible Causes
1. The power cord is
disconnected at the outlet or
the snowthrower.
Corrective Action
Electric starter does not turn
(electric-start models only)
1. Connect the power cord to the
outlet and/or the snowthrower.
2.
3.
The power cord is worn,
corroded, or damaged.
2. Replace the power cord.
The power outlet is not
energized.
3. Have a qualified electrician
energize the power outlet.
Engine does not start or starts
hard
1. The key is not in the ignition or
is in the Stop position.
1. Insert the key into the ignition
and turn it to the On position.
2.
The choke is in the Off position
and the primer has not been
pressed.
2. Move the choke to the On
position and press the primer 3
times.
3.
4.
5.
The fuel shutoff valve is not
open.
3. Open the fuel shutoff valve.
The throttle is not in the Fast
position.
4. Move the throttle to the Fast
position.
The fuel tank is empty or the
fuel system contains stale fuel.
5. Drain and/or fill the fuel tank
with fresh gasoline (not more
than 30 days old). If the
problem persists, contact your
Authorized Service Dealer.
6.
7.
The spark plug wire is loose or
disconnected.
6. Connect the wire to the spark
plug.
The spark plug is pitted, fouled, 7. Check the spark plug and
or the gap is incorrect.
adjust the gap if necessary.
Replace the spark plug if it is
pitted, fouled, or cracked.
8.
The fuel cap vent is restricted.
8. Remove the vent restriction or
replace the fuel cap.
3329-808
Rev A
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 38645, Toro Power Max 1028LE |
Model Number | 38645 |
Model Year | 2004 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Serial Number | 240000001 - 240999999 |
Product Name | Toro Power Max 1028 LE Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | Snowthrower, Two Stage Power Max |
Swath | 28 inch |
Discharge | Two Stage |
Engine Manufacturer | Tecumseh |
Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
Engine Motor Model # | HMSK100-159495Y |
Engine Motor Size | 10 hp |
Engine Motor Type | 4 Cycle CARB2, EPA2 |
Transmission Speed | 6 Forward/2 Reverse |
Transmission Type | Friction Disc |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3) Lawn and Garden readers have rated Toro Power Max 1028LE 38645 Snow Blower Operators Manual, 2004 3.0 out of 3.0 based on 1 product reviews.
having troubles with the engine becoming starved for gas before the gas tank is dry. this can happen even when the tank is 75% full.