6
Setup
Installing the Upper Handle
Assembly
3.
(of 3 washers) from the trunnion (A) on the upper end
of the speed control rod.
Remove the hairpin cotter and the outer washer
D B
1.
Lift and rotate the upper handle assembly and
position it over the lower handle.
A
Note: Ensure that the 2 cables attached to the
Quick Stick are routed inside the upper handle
legs and that the 2 lever cables and the wire for
the headlight are not pinched between the handle
sections.
C
2.
bolts, 4 curved spacers, and 4 locknuts from the
loose parts bag.
Secure the upper handle assembly with 4 handle
m-6898
Note: To make installation easier, leave the wave
washer (B) and the flat washer (C) on the
trunnion.
4.
5.
Shift the speed selector lever into Position R2.
Rotate the
lower link arm fully
upward
(counterclockwise).
m-6971
6.
Lift up on the speed control rod and insert the
trunnion into the hole in the underside of the speed
selector lever (D) located under the control panel.
m-6964
Note: If the trunnion does not fit into the hole
when you lift up on the speed control rod, rotate
the trunnion upward or downward on the speed
control rod until it fits into the hole.
Installing the Traction
Control Linkage
7.
control rod with the outer washer and a hairpin cotter
you previously removed.
Secure the trunnion and upper end of the speed
1.
Remove the hairpin cotter and washer from the
the lower end of the speed control rod (A) and insert
the lower end of the rod into the lower link arm (B) so
that the bent end of the speed control rod faces
rearward.
Note: To make the installation easier, you can look
down through the opening in the speed
selector (A).
A
A
B
m-6899
2.
Secure the lower end of the speed control rod
with the washer and hairpin cotter that you previously
removed.
m-6972
3329-808
Rev A
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38645, Toro Power Max 1028LE |
| Model Number | 38645 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 240000001 - 240999999 |
| Product Name | Toro Power Max 1028 LE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 26 oz. (.8l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | HMSK100-159495Y |
| Engine Motor Size | 10 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro Power Max 1028LE 38645 Snow Blower Operators Manual, 2004 3.0 out of 3.0 based on 1 product reviews. having troubles with the engine becoming starved for gas before the gas tank is dry. this can happen even when the tank is 75% full.