Tip of
Bar
Chain Adjustment
Tool (Bar Tool)
Chain Brake Nuts
CUTTERS MUST FACE IN
DIIRECTION OF ROTATION
Cutters
Depth Gauge
Adjusting the tension:
Chain tension is very important.
Chain
stretches during use. This is especially true
during the first few times you use your saw.
Always check chain tension each time you
use and refuel your saw.
You
can adjust the chain tension by
Drive Links
loosening the chain brake nuts and turning
the adjusting screw 1/4 of a turn while lifting
up on the bar.
7.
Place the chain over and behind the
clutch, fitting the drive links in the clutch
drum sprocket.
S Ifchainistootight,turnadjustingscrew1/4
turn counterclockwise.
S If chain is too loose, turn adjusting screw
1/4
turn clockwise.
Adjusting screw
Place chain onto the sprocket
8.
9.
Fit bottom of drive links between the
teeth in the sprocket in the nose of the
guide bar.
Fit chain drive links in bar groove.
Chain Brake Nuts
10.
Pull the bar forward until the chain is
snug in theguide bar groove. Ensureall
drive links are in the bar groove.
11.
Now, install chain brake making surethe
adjusting pin is positioned in the lower
hole inthe guidebar. Remember this pin
moves the bar forward and backward as
the screw is turned.
Adjusting Screw -- 1/4 Turn
12.
Installchainbrakenutsandfingertighten
only. Once the chain is tensioned, you
will need to tighten chain brake nuts.
S Lift up the tip of the bar and tighten the
chainbrakenutssecurely withthebartool.
S Recheck chain tension.
CHAIN TENSION (Including units with
chain already installed)
NOTE: When adjusting chain tension,
make sure the chain brake nuts are finger
tight only. Attempting to tension the chain
when the chain brake nuts are tight can
cause damage.
Chain Brake
Nuts
Checking the tension:
Use the screwdriver end of the chain adjust-
menttool(bar tool) tomovethe chainaround
the bar. If the chain does not rotate, it is too
tight.Iftooloose, thechainwillsagbelowthe
bar.
WARNING:
If the saw is operated
with a loose chain, the chain could jump off
the guide bar and result in serious injury.
7
| Categories | Chainsaw Manuals, Poulan Chainsaw Manuals |
|---|---|
| Tags | Poulan 2750, Poulan 2775, Poulan 2900, Poulan 3050 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw |
| Document File Type | |
| Publisher | poulan.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)