Poulan ES350 ES350WT Chainsaw Owners Manual

GUIDE BAR AND CHAIN OIL
STOPPING YOUR SAW
Thebarandchainrequirelubrication.    The
chain  oiler  provides  lubrication  to   the
chain and guide bar. Be sure to fill the bar
oil tank before each cutting session. Lack
of oil will quickly  ruin the bar and chain.
Too little oil will cause overheating shown
by smoke coming from  the chain and/or
discoloration of  the bar.   For  maximum
guide bar and chain life, we recommend
you  use  Poulan  chain  saw  bar  oil. If
Poulan bar oil is  not available, you may
use a good grade SAE 30 oil until you are
able to obtain Poulan brand.Use a funnel
to fill the tank.  Replace oil cap securely.
Check oil level after every 15 minutes of
operation.
S Release the trigger switch.
S If motor does not stop, disconnect
the extension cord. Discontinue use
of the unit until it has been repaired
by an authorized service dealer.
STARTING YOUR SAW
1.  Connect the saw to a power source
usingthepropersize  extensioncord
;
).
see
SELECT AN EXTENSION CORD
2.  Grip both handles firmly.
3.  Push and  hold the trigger  lock--out
button with your right hand thumb.
4.  Squeeze and hold the trigger switch.
CUTTING METHODS
OPERATING TIPS
TREE FELLING TECHNIQUES
S Check chain tension before first use
and after 1 minute of operation. See
CHECK CHAIN TENSION in the MAIN-
TENANCE section.
WARNING:  Check for  broken or
dead branches which can fall while cut-
ting causing  serious injury. Do  not cut
near buildings or electrical wires  if you
do not know the direction of tree fall, nor
cut at night since you will not be able to
see well, nor during bad  weather such
as rain, snow, or strong winds,etc. If the
tree does make contact with  any utility
line, the utility company should be noti-
fied immediately.
S Cut wood only. Do not cut metal, plas-
tics, masonry, non-wood building ma-
terials, etc.
S Stop the saw if the chain strikes a for-
eignobject.Inspectthesawandrepair
parts as necessary.
S Keep  the chain out of dirt  and sand.
Even a smallamountofdirt  willquickly
dull a chain and increase the possibil-
ity of kickback.
S Practice cutting a  few small logs using
thefollowingsteps.Thiswillhelpyouget
the “feel” of using your saw before you
begin a major sawing operation.
S Squeeze trigger switch and allow unit
to reach full speed before cutting.
S Begin  cutting  with  the saw  frame
against the log.
S Carefully plan your sawing operation in
advance.
S
Clear the work area. You need a clear
areaallaroundthetreesoyou    canhave
secure footing.
S The chain saw  operator should keep
on the uphill side of the terrain as the
tree is likely to roll or slide downhill af-
ter it is felled.
S Study  the natural  conditions  that can
causethetree  tofallina  particulardirec-
tion, such as:
S Keep the motor at full speed the en-
tire time you are cutting.
S Release the  trigger switch as soon
as the cut is completed, allowing the
motor to stop.
S
The wind direction and speed.
S The lean  of the tree. The lean of  a
treemightnotbeapparentduetoun-
even or sloping terrain.Use a plumb
or level to determine the direction of
tree lean.
S Keep the cord away from the cutting
area. Position cord so  it will not be
caughtonbranches  andthe likedur-
ing cutting.
S Weight and branches on one side.
S To avoid  losing control when cut is
complete, do  not  put pressure  on
saw at end of cut.
S
Surrounding trees and obstacles.
S Look for decay and rot. If the trunk is
rotted, it can snap and fall toward the
operator.
S Stop motor before setting saw down.
S Make  sure there is enough  room for
the tree to fall. Maintain a distance of
2-1/2
son or other objects. Noise can drown
out a warning call.
tree lengths fromthe nearestper-
8
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags,
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 16 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website