2006 Poulan P3314 P3314WS P3314WSA P3416 P3516PR P4018 P4018WM P4018WT P3818AV P4018AV P4018AV BH Chainsaw Owners Manual

Using a support stand
2
nd Cut
WARNING:   Never turn saw upside
down to undercut. The saw cannot be con-
trolled in this position.
Always make your first cut on the compres-
sionsideofthelog.   Thecompressionsideof
the log  is where  the pressure of  the log’s
weight is concentrated.
1
st Cut
st Cut
nd Cut
First cut on compression side of log
1
2
Second cut
Second cut
LIMBING AND PRUNING
WARNING:
Be alert for and guard
against kickback.   Do  not allow  the moving
chain to contact any other branches or objects
at the nose of the guide bar  when limbing or
pruning.  Allowing such  contact can result in
serious injury.
First cut on compression side of log
BUCKING WITHOUT A SUPPORT
S  Overcut through 1/3 of the diameter of the
log.
S  Roll the log over and finish with a second
overcut.
S  Watch for logs with a compression side to
prevent  the saw  from  pinching.  See il-
lustrations for cutting logs with acompres-
sion side.
WARNING:
Neverclimbintoatreeto
limb or prune.  Do not stand on ladders, plat-
forms,alog,or  inany positionwhichcancause
you to lose your balance or control of the saw.
IMPORTANT POINTS
S  Work  slowly,  keeping  both  hands  firmly
gripped on the saw. Maintain secure footing
and balance.
BUCKING USING A LOG OR
SUPPORT STAND
S  Watch out for springpoles. Springpoles are
small size  limbs which can catch  the saw
chainandwhiptowardyouor   pullyouoffbal-
ance.  Use extreme  caution  when cutting
small size limbs or slender material.
S  Be alert  for  springback.  Watch  out  for
branches that are bent or under pressure.
Avoid being struck  by the  branch or the
saw when the tension in the wood fibers is
released.
S  Remember your first cut is always on the
compression side of the log.
(Refer to  the illustrations below  for your
first and second cut)
S  Your first  cut  should  extend  1/3  of  the
diameter of the log.
S  Finish with your second cut.
Using a log for support
S  Keep a  clear work  area. Frequently  clear
branches out  of the  way to  avoid tripping
over them.
2
nd Cut
LIMBING
S  Alwayslimbatreeafter  itis cutdown.  Only
then can limbing be done safely and prop-
erly.
S  Leave the larger limbs underneath the felled
tree to support the tree as you work.
S  Start at the base of the felled tree and work
toward the top, cutting branches and limbs.
Remove small limbs with one cut.
S  Keep the tree between you and the  chain.
Cut from the  side of the  tree opposite the
branch you are cutting.
1
st Cut
1
st Cut
S  Remove larger,  supporting  branches with
the cutting techniques described in BUCK-
ING WITHOUT A SUPPORT.
S  Always usean overcutto cutsmall andfree-
ly hanging limbs. Undercutting could cause
limbs to fall and pinch the saw.
2
nd Cut
13
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags, , , , , , , , , ,
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 19 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website