Toro Snow Commander 38600 38601 38602 38603 Snow Blower Service Manual, 2006

DRIVE SYSTEM
This machine is specifically designed to clean to the
surface and propel itself in this manner. For this reason
it is not recommended for use on unpaved surfaces. If
the machine is adjusted correctly and used on a gravel
surface, it will pick up and throw gravel along with the
snow. This is undesirable due to possible injury to
passers by and potential damage to property. Any
attempt to adjust it up to pass over the gravel will result
in not cleaning to the surface and a complete loss of
self-propelling.
Drive System Disassembly
1.
The belt cover is on the left-hand side of the
machine. The belt cover is held on with two
screws and three bolts.
Figure 40
0621-0083
3.
Before you remove the belt, note the routing and if
the belt is damaged. There is a belt routing decal
on the inside of the belt cover and a copy of that
decal in the owners manual (Figure 41). If the belt
was misrouted or has jumped the pulleys, it will
likely be damaged. A damaged belt should be
replaced.
NOTE:  The first year only there was a special
diamond shape washer used in the front top hole.
Subsequent years use a standard washer (Figure
39).
X
B
A
Figure 39
3428-0230
(A)  Diamond Shaped Washer
(B)  Belt Cover
Figure 41
3428-0231-2
4.
To remove the rotor pulley, it will be necessary to
hold the rotor steady. A block of wood can be used
to stop the rotor from turning (Figure 42), allowing
the capscrew to be removed from the rotor pulley
(Figure 43). The rotor pulley is removed by pulling
straight off.
2.
Remove the belt cover and the left rotor guard.
The belt system is now fully exposed (Figure 40).
4 - 2
Snow Commander Service Manual
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, , , ,
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 56 pages
Document TypeService Manual
LanguageEnglish, Français
Serial Number260010001 - 260999999
Product NameToro Snow Commander Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSingle Stage Snow Commander
Swath24 inch
DischargeSingle Stage
Engine ManufacturerBriggs & Stratton
Engine Oil Type38602
Engine Motor Model #084333-0199-E1
Engine Motor Size141cc
Engine Motor Type2 Cycle EPA2
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website