MAINTENANCE
2.
Insert the new rotor blade between the rotor drum
parts.
5.
Remove the six bolts and locknuts that hold the
scraper in place (Fig. 17).
3.
Secure the rotor blade to the rotor drum parts with
the two hex-head cap screws and two locknuts
that you previously removed. Position the bolt
heads on the thick rubber side of the rotor blade
(Figure 85).
4.
Curve the rotor blade and secure it with the
remaining Torx screws and locknuts, positioning
the screw heads on the thick rubber side of the
rotor blade (Figure 85).
5.
6.
Tighten all screws and locknuts securely.
Replace the scraper. Refer to “Replacing the
Scraper” (below).
Figure 87
m-5060
7.
8.
9.
Connect the wire to the spark plug.
Install the control panel.
(A) Carriage Bolt (6)
(B) Locknut (6)
(C) Scrapper
Insert the key in the switch.
6.
7.
Remove the scraper.
Replacing the Scraper
Install the new scraper to the housing using the
bolts and the locknuts you previously removed.
8.
Connect the wire to the spark plug.
Install the control panel.
NOTE: If the rotor blades are partially or completely
worn, replace the rotor blades when you replace the
scraper. This ensures proper snowthrower operation
and performance.
9.
10.
Insert the key in the switch.
1.
Stop the engine and wait for all moving parts to
stop.
Replacing the Spark Plug
2.
3.
Remove the key from the switch.
Before each season, check the spark plug. Replace the
plug if fouled with deposits or if the electrodes in the
center of the plug are dark or have deteriorated spark
plug - NGK BPMR4A or equivalent.
Disconnect the wire from the spark plug. Refer to
steps 1 through 3 of “Replacing the Spark Plug”
(below).
4.
Tip the snowthrower backward onto its handle.
7 - 6
Snow Commander Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38600, Toro 38601, Toro 38602, Toro 38603, Toro Snow Commander |
| Model Year | 2006 |
| Download File |
|
| Document Type | Service Manual |
| Language | English, Français |
| Serial Number | 260010001 - 260999999 |
| Product Name | Toro Snow Commander Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Single Stage Snow Commander |
| Swath | 24 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 38602 |
| Engine Motor Model # | 084333-0199-E1 |
| Engine Motor Size | 141cc |
| Engine Motor Type | 2 Cycle EPA2 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)