Figure4
1.
2.
Mountingplate
Shroud
3.
4.
Chutecrank
Gear
7.
8.
9.
Align the mounting plate holes with the upper and
lower tubing holes.
Insert the end of the chute crank through the hole in
the shroud.
Figure6
1.
2.
3.
Chutedeector
4.
5.
6.
Carriagebolt(2)
Metalwasher(2)
Locknut(2)
Turn the chute crank rod slowly until the flattened end
drops into the slot in the gear, then firmly push the
chute crank into the gear until it snaps into place (Figure
Dischargechute
Rubberwasher(2)
2.
3.
Insert a rubber washer between the chute deflector and
the discharge chute on each side while maintaining the
hole alignment (Figure 6).
4
and Figure 5).
Secure the deflector to the discharge chute with 2
carriage bolts, 2 metal washers, and 2 locknuts.
Note: Ensure that the square shoulders on the carriage
bolts align with the inside square on the discharge chute.
Position the metal washers to the outside of the chute
deflector as shown in Figure 6. Do not overtighten the
bolts.
Figure5
ProductOverview
1.
Chutecrank
2.
Chutecrankgear
10.
Secure the upper and lower tubing and the mounting
plate together with 2 machine screws and 2 locknuts.
Note: Position the screw heads on the outside of the
mounting plate. Be careful not to damage the internal
electrical wiring when you insert the screws. If the
wiring blocks the hole, use a blunt 1/8 inch punch
to carefully route the electrical wiring away from the
aligned holes.
2.
InstallingtheDischarge
Chute
1.
Position the chute deflector onto the discharge chute
and align the mounting holes (Figure 6).
Figure7
1.
2.
3.
4.
Controlbar
Chutecrank
Beltcover
Rotor
5.
6.
7.
Dischargechute
Chutedeector
Secondaryhandle
5
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1800 Power Curve, Toro 38026 |
| Model Number | 38026 |
| Model Year | 2007, 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 270000001 - 270999999, 280000001 - 280999999 |
| Product Name | 1800 Power Curve Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower |
| Swath | 18 inch |
| Discharge | Single Stage |
| Engine Motor Size | 7.3 amp |
| Engine Motor Type | 230 VAC |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)