Toro 38026 1800 Power Curve Snowblower Operators Manual, 2007-2008

Maintenance
Important:  All electrical repairs should  be
performed only by an Authorized Service Dealer.
Note: Determine the left and right sides of the machine
from the normal operating position.
Figure13
1.
2.
Rightsidecover
3.
Skid
Screw
If the extension  cord is plugged into  the
snowthrower, someone could accidentally operate
snowthrower while you are performing maintenance
on it, causing serious personal injury.
2.
Use a 5/16 inch Allen wrench to turn the rotor shaft
clockwise (left-hand thread) while holding the rotor
(Figure 14).
Disconnect the extension cord before you perform
any maintenance.
LubricatingtheSnowthrower
You do not need to lubricate the snowthrower; all the
bearings were lubricated at the factory for the life of the
snowthrower.
Figure14
1.
Rotorshaft
2.
Rotor
ReplacingtheScraper
Note: You may need to tap the Allen wrench with a
hammer to loosen the rotor shaft. Wedge a stick or a
hammer handle in the rotor to prevent it from rotating.
The scraper is located at the bottom of the rotor housing
as shown in Figure 12.
Note: If you cannot remove the rotor shaft by holding
the rotor, remove the left side cover and the skid (Figure
15).
Figure12
1.
Scraper
2.
Screw(2)
1.
Remove the 2 screws that secure the scraper to the
snowthrower (Figure 12).
Figure15
1.
Leftsidecover
2.
Skid
2.
Install the new scraper and fasten it securely with 2
screws.
3.   Hold the hex nut with a 7/8  inch wrench while
unscrewing the rotor shaft (Figure 16).
ReplacingtheRotor
1.
Remove the 3 screws that secure the right side cover
and the skid to the snowthrower frame (Figure 13).
Figure16
1.
Hexnut
8
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38026
Model Year2007, 2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 12 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number270000001 - 270999999, 280000001 - 280999999
Product Name1800 Power Curve Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower
Swath18 inch
DischargeSingle Stage
Engine Motor Size7.3 amp
Engine Motor Type230 VAC
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website