4.
Connecting the Wire to the
Headlight
1
Cable tie
Procedure
1.
Insert the wire connector on the loose end of the
wire straight into the back of the headlight until it is
securely in place (Figure 12).
Figure 13
2.
Install the dipstick securely.
Note: Do not spill oil around the oil fill tube; oil
could leak onto traction parts and cause the traction
to slip.
6.
Checking the Tire Pressure
Figure 12
1.
Plastic clip on wire
connector
U-bolt
3. Cable tie
Procedure
2.
The tires are overinflated at the factory for shipping.
Reduce the pressure equally in both tires to between 17
and 20 psi (116 and 137 kPa).
Note: Ensure that the plastic clip on the wire
connector is on the bottom (Figure 12).
2.
Secure a cable tie (from the loose parts bag) around
the wire and the handle about an inch (2.5 cm) below
the U-bolt (Figure 12).
7.
Scraper
Checking the Skids and
5.
Filling the Engine with Oil
Procedure
Refer to Checking and Adjusting the Skids and Scraper
in Maintenance.
Procedure
Your snowthrower comes with 20 oz. of oil in the
engine crankcase.
Note: Before starting the engine, check the oil level
and add oil if necessary.
Max. fill: 20 oz. (0.55 l), type: automotive detergent oil
with an API service classification of SF, SG, SH, SJ, SL,
or higher. Use SAE 5W30 or SAE 10W30 oil. Refer to
your engine owner’s manual.
1.
Remove the dipstick and slowly pour oil into the oil
fill tube to raise the oil level to the Full mark on the
dipstick. Do not overfill.(Figure 13).
10
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38639C, Toro Power Max 828OE |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999 |
| Product Name | Toro Power Max 828 OE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 5w-30 or 10w-30 / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 15D1040112E1 |
| Engine Motor Size | 249cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)