8.
Checking the Traction Drive
A. Release the traction lever and stop the engine.
Operation
B. Disconnect the trunnion from the speed selector
lever (Figure 6).
Procedure
C. Turn the trunnion upward (counterclockwise) on
the speed control rod (Figure 6).
D. Connect the trunnion to the speed selector lever
(Figure 6).
If the traction drive is not properly adjusted,
the snowthrower may move in the direction
opposite of what you intended, causing injury
and/or property damage.
7.
If you made any adjustments, repeat this procedure
until no adjustments are required.
Important: If the snowthrower moves when the
traction lever is in the released position, check the
traction cable (refer to Checking and Adjusting
the Traction Cable) or take the snowthrower to an
Authorized Service Dealer for service.
Carefully check the traction drive and adjust it
properly, if necessary.
1.
2.
Start the engine; refer to Starting the Engine.
Move the speed selector to Position R1; refer to
Operating the Speed Selector.
Product Overview
3.
Squeeze the left hand (traction) lever to the hand-grip
(Figure 14).
Figure 14
The snowthrower should move rearward. If the
snowthrower does not move or moves forward,
complete the following:
A. Release the traction lever and stop the engine.
B. Disconnect the trunnion from the speed selector
lever (Figure 6).
Figure 15
1.
2.
3.
4.
Hand-grip
9.
10.
11.
12.
Discharge chute
Scraper
C. Turn the trunnion downward (clockwise) on the
speed control rod (Figure 6).
Auger/impeller lever
Speed selector lever
Auger
Quick Stick™ discharge
chute control
Skid (2)
D. Connect the trunnion to the speed selector lever
(Figure 6).
5.
6.
Traction lever
Fuel tank cap
13.
14.
Electric starter button
Electric starter plug-in
4.
5.
Release the traction lever.
7.
8.
Engine oil fill tube/dipstick 15. Snow cleanout tool
Chute deflector
16.
Headlight
Move the speed selector to the Position 1; refer to
Operating the Speed Selector.
6.
Squeeze the left hand (traction) lever to the hand-grip
(Figure 14).
The snowthrower should move forward. If the
snowthrower does not move or moves rearward,
complete the following:
11
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38639C, Toro Power Max 828OE |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001 - 280999999 |
| Product Name | Toro Power Max 828 OE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 5w-30 or 10w-30 / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 15D1040112E1 |
| Engine Motor Size | 249cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)