Poulan P3314 P3314WS P3314WSA P3416 P3516PR P4018WM P4018WT P3818AV P4018AV P4018AV BH Chainsaw Owners Manual

3.
4.
Using bar tool, roll chain around guide bar
to ensure all links are in bar groove.
Lift up tip of guide bar to check for sag.
6.
7.
Use the screwdriver end of the bar tool
to move chain around guide bar.
If chain does  not rotate,  it is too  tight.
Slightly  loosen  bar  nuts  and   loosen
Release tip of guide  bar, then turn ad-
justingscrew 1/  turnclockwise.  Repeat
chain by turning the adjusting screw 1/
4
until sag does not4   exist.
Adjusting Screw -- 1/4 Turn
turn  counterclockwise.  Retighten  bar
nuts.
8.
If chain is too loose, it will sag below the
guide bar.  DO NOT operate the saw if
the chain is loose.
NOTE:
The  chain is  tensioned  correctly
5.
While lifting tip of guide bar, tighten bar
nuts securely with the bar tool.
when the weight of the chain does not cause it
to sag below the guide bar (with the chain saw
sitting in an upright position), but the chain still
moves freely around the guide bar.
WARNING:
If the saw is operated
Bar Nuts
with a loose chain, the chain could jump offthe
guide bar and result in serious injury to the op-
erator and/or damage the chain making it un-
usable. If the chain jumps off the guide bar, in-
spect each drive  link for damage.  Damaged
chain must be repaired or replaced.
OPERATION
KNOW YOUR CHAIN SAW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with the location of
the various controls and adjustments. Save this manual for future reference.
Chain
Adjustment Tool
(Bar Tool)
Front Handle
Front Hand Guard
Starter Rope
ON/STOP
Switch
Choke/
Fast Idle
Lever
Chain
Muffler
Bar
Sprocket
Hole
Bar Oil Fill Cap
Primer Bulb
Chain
Starter Housing
Fuel Mix Fill Cap
Cylinder Cover
Chain
Brake
Throttle
Lockout
Direction
of Travel
Rear
Handle
Adjusting Screw
Guide Bar
Chain
Catcher
Throttle
Trigger
Clutch Cover
Bar Nuts
ON/STOP SWITCH
The ON/STOP SWITCH  is used to stop the
engine.
THROTTLE TRIGGER
The THROTTLE  TRIGGER controls  engine
speed.
8
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags, , , , , , , , ,
Model Year2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 21 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website