Location of shipping spacer
Place chain onto the sprocket
Chain Brake
Nuts
7.
Fit bottom of drive links between the
teeth in the sprocket in the nose of the
guide bar.
Chain Brake
8.
9.
Fit chain drive links in to bar groove.
Pull the bar forward until the chain is
snug in the groove of the bar. Ensureall
drive links are in the bar groove.
Bar Tool
10.
11.
Hold guide bar against the saw frame
and install the chain brake.
3.
Turn adjusting screw on bar counter-
clockwisetomovethetensioningrackas
far as it will go towardthe frontof thebar.
Replacethechainbrakenuts andtighten
finger tight.
Once the chain is ten-
sioned,youwillneedtotightenchainbra-
ke nuts.
Adjusting
Screw
CHAIN TENSION (Including units with
chain already installed)
NOTE: When adjusting chain tension,
make sure the chain brake nuts are finger
tight only. Attempting to tension the chain
when the chain brake nuts are tight can
cause damage.
Tensioning Rack
Checking the tension:
4.
5.
Slidethebar behind clutchdrum untilbar
stops against clutch drum sprocket.
Use the screwdriver end of the chain adjust-
menttool(bar tool) tomovethe chainaround
the bar. If the chain does not rotate, it is too
tight.Iftooloose, thechainwillsagbelowthe
bar.
Mount the bar
Prepare the chain by checking the proper
direction. Without followingthe illustrationit
is easy toplacethechainon thesaw inthe
wrong direction. Use the illustration of the
chain to determine the proper direction.
Chain Adjustment
Tool (Bar Tool)
Chain Brake Nuts
Adjusting the tension:
Tip of
Bar
Chain tension is very important.
Chain
stretches during use. This is especially true
during the first few times you use your saw.
Always check chain tension each time
before you start the chain saw.
An adjusting screw (located on the guide
bar) is usedto adjustthe tensionof thechain
(see illustration).
S Loosen the chain brake nuts.
S Turn adjusting screw clockwise untilchain
solidly contacts bottom of guide bar rail.
Guide bar
CUTTERS MUST FACE IN
DIIRECTION OF ROTATION
Cutters
Depth Gauge
Adjusting
Screw
Drive Links
6.
Place the chain over and behind the
clutch, fitting the drive links in the clutch
drum sprocket.
S Using the screwdriver end of the bar tool,
roll chain around guide bar to ensure all
links are in bar groove.
7
| Categories | Chainsaw Manuals, Poulan Pro Chainsaw Manuals |
|---|---|
| Tags | Poulan Pro PP4620AV |
| Model Year | 2009 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw |
| Document File Type | |
| Publisher | poulanpro.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)