2010 Poulan ES350 ES350WT Chainsaw Owners Manual

Right Hand
Small Radius
Tip Guide Bar
Left Hand
Large Radius
Tip Guide Bar
S Low Kickback Chain has met kickback
performance requirements when tested
on the representative sample  of these
chain saws specified in ANSI B175.1.
S Position  your left  hand  on the  front
handlebar so it is in a straight line with
your  right hand  on  the rear  handle
Low Kickback Chain
Contoured Depth Gauge
when  making bucking  cuts.
Stand
slightly to  the left side  of the saw  to
keep your body from being in a direct
line with the cutting chain.
S Stand  with  your  weight evenly  bal-
anced on both feet.
Elongated Guard Link
Deflects Kickback Force
And Allows Wood To
Gradually Ride Into Cutter
S Do not overreach.Youcould bedrawn
orthrown off balance and lose control.
S Do not cut above shoulder height. It is
difficult  to  maintain  control   of  saw
above shoulder height.
WARNING:   Computed  Kickback
Angle (CKA) listed on your saw and listed
in the following CKA Table represents the
angle  of kickback  your  bar  and  chain
combinations will have when tested in ac-
cordance with CSA and ANSI standards.
ComputedanglesrepresentedintheCKA
column indicate  total energy  and angle
associated without a chain brake. When
purchasing replacements, considerations
should be given to the lower CKA values.
Inallcases,lowerCKAvaluesrepresenta
safer operating environment for the user.
S Tip contact in some cases may cause
a lightning fast REACTION, kicking the
guide bar up and back toward the op-
erator.
S Pinching the saw chain along the tipof
the guide bar may push the guide bar
rapidly back towards the operator.
S Either of  these reactions may  cause
you to lose  control of the saw  which
could result in serious  injury.  Do not
rely exclusively  upon safety  devices
built into your saw.
KICKBACK SAFETY FEATURES
WARNING: The following features
are included on your saw to help reduce
hazard of kickback; however, such fea-
tures will not totally  eliminate this dan-
ger. Do not rely only on safety devices.
Follow all safety rules to help avoid kick-
back and other forces which can result
in serious injury.
S Hand Guard: designed  to reduce the
chance of  your left  hand  contacting
the chain ifyour hand slips off the front
handlebar.
S Position  of front  and rear handlebars:
designed with  distance between  han-
dles and “in-line”  with each other. The
spread  and   “in-line”  position  of  the
hands provided by this design work to-
getherto give balance and resistancein
controlling the pivot of the saw back to-
ward the operator if kickback occurs.
The following guide bar  and chain com-
binations meet kickback requirements of
CSA Z62.1  &  Z62.3 and  ANSI B175.1
when used on saws listed in this manual.
Use of bar and chain combinations other
thanthoselisted  isnotrecommendedand
may not meet the CKA requirements per
standard.
S Reduced-Kickback
Guide   Bar:   de-
signed with a small radius tip which re-
duces the size of the  kickback danger
zone. This type bar has  been demon-
strated to significantly reduce the num-
ber and seriousness of kickbacks when
tested in accordance with ANSIB175.1.
5
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 17 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website