Poulan P3314 P3314WS P3314WSA P3416 P3516PR P4018 P4018WM P4018WT P3818AV P4018AV P4018AV BH Chainsaw Owners Manual

CHECK CHAIN SHARPNESS
INSPECT AND CLEAN UNIT AND
DECALS
A  sharp chain  makes wood  chips. A  dull
chain makes  a sawdust  powder and  cuts
slowly. See CHAIN SHARPENING.
S
After  each use,  inspect complete  unit for
loose or damaged parts. Clean the unit and
decals using a damp cloth with a mild deter-
gent.
CHECK GUIDE BAR
Conditions  which require  guide  bar mainte-
nance:
S
Wipe off unit with a clean dry cloth.
S  Saw cuts to one side or at an angle.
S  Saw has to be forced through the cut.
S  Inadequate supply of oil to bar/chain.
Check the condition of guide bar each time
chain is  sharpened. A  worn guide bar  will
damage the chain and make cutting difficult.
After each use, ensure ON/STOP switch is
in the STOP position, then clean all sawdust
from the guide bar and sprocket hole.
To maintain guide bar:
CHECK CHAIN BRAKE
See  CHAIN  BRAKE in  the  OPERATION
section.
CLEAN AIR FILTER
CAUTION: Donotcleanfilteringasolineor
other flammable solvent to avoid creating a
firehazardor  producing harmfulevaporative
emissions.
Cleaning the air filter:
S  Move ON/STOP switch to STOP.
S  Loosen and remove bar  nuts and clutch
cover.  Remove bar and chain from saw.
S  Clean the oil holes  and bar groove after
each 5 hours of operation.
A dirty air filter decreases the life and perfor-
mance of the engine andincreases fuelcon-
sumption  and harmful  emissions.  Always
clean your air filter after 10 tanks of fuel or 5
hours of  operation, whichever comes  first.
Clean more frequently in dusty conditions.A
used  air  filter   can  never  be  completely
cleaned. It is advisable to replaceyour air fil-
ter withanew oneafter every 50hours ofop-
eration, or annually, whichever comes first.
Remove Sawdust From
Guide Bar Groove
1.
2.
3.
4.
Loosen 3 screws on cylinder cover.
Oil Holes
Remove cylinder cover.
Remove air filter cover and air filter.
Cleantheair  filter usinghotsoapywater.
Rinsewithcleancoolwater.Air   drycom-
pletely before reinstalling.
Reinstall air filter and air filter cover.
Reinstall cylinder cover  and 3 screws.
Tighten securely.
S  Burring of  guide  bar  rails  is  a  normal
process of rail wear. Remove these burrs
with a flat file.
5.
6.
S  Whenrailtopis  uneven,useaflatfiletore-
store square edges and sides.
File Rail Edges
and Sides
Square
Cylinder
Cover
Air Filter
Cover
Worn Groove
Correct Groove
Replace guide bar when the groove  is worn,
the guide bar is bent or cracked, or when ex-
cess heatingor burringoftherails  occurs.Ifre-
placementis necessary,useonlytheguidebar
specified for your saw in the repair parts list or
on the decal located on the chain saw.
Air Filter
CHECK FUEL MIXTURE LEVEL
S  See FUELING  ENGINE under  the  OP-
ERATION section.
LUBRICATION
Bar Oil
Fill Cap
INSPECT  MUFFLER  AND   SPARK
ARRESTING SCREEN
As the unit is used, carbon deposits build up
on the muffler  and spark arresting screen,
and must be removedto avoidcreating afire
hazard or affecting engine performance.
S  See GUIDE BAR AND CHAIN OIL under
the OPERATION section.
Replacethespark  arrestingscreen ifbreaks
occur.
15
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags, , , , , , , , , ,
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 21 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website