Poulan Pro SM4218AVX Chainsaw Owners Manual

S  Turn the engine off and let saw cool  in a
non-combustible area, not on dry leaves,
straw, paper, etc. Slowly remove fuel cap
and refuel unit.
S  Storetheunitandfuelinanareawherefuel
vapors  cannot   reach  sparks  or   open
flames from water heaters, electric motors
or switches, furnaces, etc.
REDUCE THE CHANCE OF
KICKBACK
S  Recognize  that  kickback  can  happen.
With a basic  understanding of kickback,
you can  reduce the element  of surprise
which contributes to accidents.
S  Never letthemovingchaincontactanyob-
ject at the tip of the guide bar.
KICKBACK
S  Keep the working area free from obstruc-
tionssuchas  othertrees,branches,rocks,
fences,  stumps, etc.  Eliminate or  avoid
any obstruction that your saw chain could
hit while you are cutting.  When cutting a
branch, do  not let the  guide bar contact
branch or other objects around it.
S  Keep your saw chain sharp and properly
tensioned.  A  loose or dull chain  can in-
crease the chance of kickback occurring.
Follow manufacturer’s  chain  sharpening
andmaintenanceinstructions.  Check ten-
sion at  regular intervals  with the engine
stopped, never  with the  engine running.
Make sure the bar nuts are securely tight-
ened after tensioning the chain.
WARNING:
Avoid kickback which
can result in serious injury. Kickback is the
backward,upwardorsuddenforwardmotion
of  the guide  bar occurring  when the  saw
chainnear theupper tip oftheguidebarcon-
tacts any object such as a log or branch, or
when the wood  closes in  and pinches the
saw chaininthecut.Contactingaforeignob-
ject in  the wood can  also result in  loss of
chain saw control.
S Rotational Kickback can occur when the
moving chain contacts an objectat theup-
per tip of the guide bar. This  contact can
cause  the chain  to  dig into  the  object,
which stops the chain for an instant. The
result is a lightning fast, reverse reaction
which kicks the guide bar up and back to-
ward the operator.
S Pinch-Kickback can occur when the the
wood closes  in and pinches  the moving
saw chain in the cut  along the top of the
guide bar and the saw chain  is suddenly
stopped.  This  sudden  stopping   of  the
chain results  in  a reversal  of the  chain
force used  to cut wood  and causes  the
sawtomoveintheoppositedirectionofthe
chain rotation. The saw is driven straight
back toward the operator.
S
Begin and continue cutting at full speed.  If
the chain is moving at a slower speed, there
is greater chance of kickback occurring.
Cut one log at a time.
S
S  Use extreme caution when re-entering a
previous cut.
S  Do not attempt cuts starting with the tip of
the bar (plunge cuts).
S  Watch for shifting logs or  other forces that
could close a cut and pinch or fall into chain.
S  Use the  Reduced--Kickback  Guide  Bar
and  Low--Kickback  Chain  specified  for
your saw.
MAINTAIN CONTROL
S Pull-In  can occur when  the moving chain
contacts a foreign object in the wood in the
cutalongthebottom  ofthe  guidebar andthe
saw chainis suddenly stopped. This sudden
stopping pulls  the saw  forward and  away
fromtheoperator  and couldeasily causethe
operator to lose control of the saw.
Stand to the
left of the saw
Thumb on
underside of
Avoid  Pinch--Kickback:
handlebar
Never reverse
hand positions
S  Be extremely aware  of situations  or ob-
structions thatcan causematerial topinch
the top of or otherwise stop the chain.
S  Do not cut more than one log at a time.
S  Do not twist the  saw as the  bar is  with-
drawn from an undercut when bucking.
Avoid Pull--In:
S  Always begin cutting with theengine atfull
speed and the saw housing against wood.
S  Use wedges  made  of  plastic  or wood.
Never use metal to hold the cut open.
Elbow locked
Kickback Path
Thumb on underside of
handlebar
S  Keepagood,firmgriponthesaw    withboth
hands  when the  engine  is running  and
don’tletgo.  A firmgripwillhelpyoureduce
kickback and maintain control of the saw.
Keep the fingers  of your left  hand encir-
cling and your  left thumb under the front
handlebar.Keepyourrighthandcomplete-
Avoid Obstructions
Clear The
Working Area
4
Product Specification
CategoriesChainsaw Manuals, Poulan Pro Chainsaw Manuals
Tags
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 21 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan Pro. Poulan Pro US phone support. Wheeled (Mowers, Tractors, Tillers, Snow Throwers): 1-800-849-1297, Handheld (Chainsaws, Trimmers, Blowers, Edgers): 1-800-554-6723, Chainsaw
Document File TypePDF
Publisherpoulanpro.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website