2.
Wait for all moving parts to stop before leaving the
operating position.
3.
4.
Remove the ignition key.
Close the fuel shutoff valve by rotating it clockwise
(Figure 32).
Figure 33
2.
To stop the traction drive, release the traction lever.
Using the Wheel Clutch Levers
Models 38634, 38644, and 38654 only
Figure 32
The wheel clutch levers allow you to momentarily
disengage the drive to one or both wheels with the
traction drive lever still engaged. This enables you to
turn and maneuver the snowthrower easily.
5.
Pull the recoil starter 3 or 4 times. This helps prevent
the recoil starter from freezing up.
Note: Holding down the traction lever against the
handle engages the traction drive to both wheels.
Operating the Traction Drive
To turn the snowthrower to the right, lift up on the
right wheel clutch lever and squeeze it toward the handle
(Figure 34).
If the traction drive is not properly adjusted,
the snowthrower may move in the direction
opposite of what you intended, causing injury
and/or property damage.
Carefully check the traction drive and adjust
it properly, if necessary; refer to Checking the
Traction Drive Operation in Setup for more
information.
Figure 34
Important: If the snowthrower moves when the
traction lever is in the released position, check the
traction cable (refer to Checking and Adjusting
the Traction Cable) or take the snowthrower to an
Authorized Service Dealer for service.
Note: This disengages the drive to the right wheel while
the left wheel continues driving, and the snowthrower
turns to the right.
Note: Similarly, squeezing the left wheel clutch lever
Important: To operate the traction drive, you
must operate the snowthrower with the self-propel
feature engaged. Refer to Freewheeling or Using
the Self-propel Drive.
turns the snowthrower to the left.
When you complete the turn, release the wheel clutch
lever, and the drive re-engages both wheels (Figure 35).
1.
To engage the traction drive, squeeze the left hand
(traction) lever to the handgrip (Figure 33).
16
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38624, Toro 38634, Toro 38644, Toro 38654, Toro Power Max 1128OX |
| Model Number | 38624, 38634, 38644, 38654 |
| Model Year | 2010 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 310000001 - 310999999 |
| Product Name | Toro Power Max 1128 OXE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 28 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 28 oz. (.83) 5w-30 or 10w-30 / API SH or higher |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | 21M2140126E1 |
| Engine Motor Size | 342cc |
| Engine Motor Type | 4 Cycle CARB3, EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 1128OXE 38624 38634 38644 38654 Snow Blower Operators Manual, 2010 5.0 out of 5.0 based on 1 product reviews. very good website very helpful