Driving the Machine in
Transport
traveling at the desired ground speed, drive the
mower onto the green, lower the front of the
mower, and commence operation.
1.
Push the kick stand down with your foot and pull
up on the handle to raise the rear of mower and
install the transport wheels.
4.
5.
When finished mowing, drive off of the green,
move the traction control lever to the Disengage
position, stop the engine and push the reel drive
lever into the Disengage position.
2.
To release the kickstand, pull up on the handle,
push the mower forward, and then lower the rear of
mower onto the transport wheels.
Empty the grass basket of clippings, install the grass
basket, and commence transport operation.
3.
4.
Ensure that the traction and reel drive controls are
in the Disengaged position and start the engine.
Operating Tips
Set the throttle control to Slow, raise the front of the
machine up slightly, gradually engage the traction
drive and slowly increase the engine speed.
Before Mowing
•
Ensure that the mower is carefully adjusted and
is set evenly on both sides of the reel. Improper
mower adjustment is magnified many times over in
the appearance of the clipped turf.
5.
Adjust the throttle to operate the mower at the
desired ground speed and transport the mower to
the desired destination.
Preparing to Mow
• Remove all foreign objects from the turf prior to
mowing.
1.
2.
3.
Return the traction control lever to the Disengage
position, the throttle to the Slow position, and stop
the engine.
•
Ensure that everyone, especially children and pets,
are clear of the work area.
Push the kickstand down with your foot and pull
up and back on the handle to raise the wheels off
of the ground.
Mowing Techniques
•
Mow a green in a straight back and forth direction,
across the green.
Push the locking clips on the wheels out of the
grooves in the shafts.
•
Avoid circular mowing or turning the mower on a
green because scuffing may occur. Turn the mower
off of the green by raising the cutting reel (pushing
the handle down) and turning on the traction drum.
4.
5.
Slide the wheels off of the shafts.
Move the unit off of the kickstand.
•
Mow at a normal walking pace. Fast speed saves
very little time and will result in an inferior mowing
job.
Mowing
Proper use of the machine provides the smoothest
turf cutting available. Refer also to Operating Tips
for fundamental suggestions to obtain the utmost
performance from your mower.
Important: Excessive operation of the cutting unit
with the absence of grass clippings (lubricant) can
damage the cutting unit.
1.
Start the engine, set the throttle at reduced speed,
push down on the handle to raise the cutting unit,
move the traction lever to the Engaged position,
and transport the mower onto collar of the green.
2.
3.
Move the traction lever to the Disengaged position
and move the reel drive lever to the Engaged
position.
Move the traction lever to the Engaged position,
increase the throttle speed until the mower is
16
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04034, Toro 04035, Toro Greensmaster 1000, Toro Greensmaster 1600 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)