Electrical System
Maintenance
Brake Maintenance
Adjusting the Service/Parking
Brake
Servicing the Interlock Switch
If service/parking brake slips when operated, an
adjustment is required.
Use the following procedure if the switch needs
adjustment or replacement.
1.
Move service/parking brake lever to the Off
position.
1.
Make sure the engine is off and the traction lever
is disengaged and resting against the neutral stop
(Figure 26)..
2. Loosen the retainer securing the V-belt cover and
pivot the cover open.
3.
To increase the cable tension, loosen the front
cable jam nut and tighten the back cable jam nut
(Figure 27) until a force of 5 to 7 lb is required to
engage the brake. Measure the force at the lever
knob. Do not over-adjust it so that the brake band
drags.
Figure 26
1.
2.
Traction lever
Neutral stop
3.
4.
Interlock switch
.032" Gap
Figure 27
1.
Traction cable
2.
Service/parking brake
cable
2.
Loosen the interlock switch mounting fasteners
(Figure 26).
4.
Close the cover and secure the retainer.
3.
4.
Place a .032" thick shim between the traction lever
and the interlock switch (Figure 26).
Tighten interlock switch mounting fasteners.
Recheck gap. The traction lever must not contact
the switch.
5.
Engage traction lever and verify that the switch loses
continuity. Replace if required.
23
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro 04034, Toro 04035, Toro Greensmaster 1000, Toro Greensmaster 1600 |
Model Year | 2011 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)