3
Installing the Transport
Wheels
Parts needed for this procedure:
1
1
2
Wheel shaft, right
Wheel shaft, left
Transport wheels (obtain separately)
Procedure
1.
Push the kick stand down with your foot and pull
up on the handle to support the mower on the kick
stand.
Figure 7
1.
Locking clip
2.
3.
Apply #242 Loctite to the threads of the wheel
shafts.
7. Rotate wheel back and forth until it slides completely
onto axle and locking clip is secured in groove on
axle shaft.
Thread the right wheel shaft into the drive pulley on
the right side of the machine (Figure 6).
8.
9.
Repeat procedure on opposite side of machine.
Inflate the tires to 12 to 15 psi. (574 to 718 Pa).
Note: The right wheel shaft has left hand threads.
4
Adjusting the Cutting Unit
No Parts Required
Procedure
Figure 6
Before operating the machine, complete the following
adjustments:
1.
Right wheel shaft
•
•
•
•
Level the rear drum to the reel.
Adjust the bedknife to the reel.
Adjust the height-of-cut.
4.
5.
6.
Torque the shaft to 65 to 75 ft-lb (88 to 101 N-m).
Slide the wheel onto the axle (Figure 7).
Pivot the wheel locking clip away from center of
the wheel allowing it to slide farther onto the axle
(Figure 7).
Adjust the grass shield height
• Adjust the cut-off bar.
Refer to the Cutting Unit Maintenance section in
Maintenance for instructions on performing these
procedures.
11
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04052, Toro 04060, Toro Greensmaster 1000, Toro Greensmaster 1600 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)