12.
13.
14.
15.
Install the spark plug and tighten it securely.
Connect the wire to the spark plug.
Remove the fuel tank cap.
Install the shroud with the screws you removed in
step 4.
Note: Ensure that the upper and lower shrouds fit
together in the side grooves.
16.
17.
Install the fuel tank cap.
Install the chute seal, the discharge chute, and the
discharge chute handle onto the machine using the
hardware you removed in step 3.
Note: The small screw goes through the small hole
in the chute seal at the front of the discharge chute
opening.
Replacing the Drive Belt
If drive belt becomes worn, oil-soaked, excessively
cracked, frayed, or otherwise damaged, replace the belt.
Figure 25
1.
2.
Screw (4)
Shroud
3.
Spark-plug wire
1.
Remove the drive belt cover by removing the 3 bolts
as shown in Figure Figure 27.
5.
Remove the fuel tank cap.
6.
Remove the shroud (Figure 25).
Install the fuel tank cap.
7.
8.
Disconnect the wire from the spark plug.
Clean around the spark plug.
9.
10.
Remove the spark plug from the cylinder head.
Important: Replace a cracked, fouled, or
dirty spark plug. Do not clean the electrodes
because grit entering the cylinder can damage
the engine.
11.
Set the gap on the plug to 0.030 inch (0.76 mm)
(Figure 26).
Figure 27
1.
2.
Drive belt cover
Bolt (3)
6.
7.
Drive belt
Rotor shaft
3.
Rotor pulley bolt
8.
Brake spring (unhook from
idler arm here)
4.
5.
Curved washer
Rotor pulley
9.
Idler pulley
10.
Engine pulley
2.
Unhook the brake spring from the idler arm to
release the belt tension (Figure 27).
Figure 26
1.
2.
Center electrode insulator
Side electrode
3. Air gap (not to scale)
3.
Remove the screw and curved washer that hold the
rotor pulley (Figure 27).
13
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 38587, Toro 38593 |
Model Number | 38587, 38593 |
Model Year | 2011 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Serial Number | 311000001 - 311999999 |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | Power Clear, Snowthrower |
Swath | 21 inch |
Discharge | Single Stage |
Engine Manufacturer | Briggs & Stratton |
Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
Engine Motor Model # | 0842330199E8 |
Engine Motor Size | 141cc |
Engine Motor Type | 2 Cycle EPA2 |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3) Lawn and Garden readers have rated Toro Power Clear 38587 38593 Snow Blower Operators Manual, 2011 3.0 out of 3.0 based on 1 product reviews.
Not great, not the whole manual will not work for me