Toro 37772 Power Max 826 OE Snowblower Manual, 2015

from freezing. Stop the engine, wait for all moving parts
to stop, and remove all ice and snow from the machine.
With the engine off, pull the recoil starter handle several
times and push the electric-starter button once to prevent
the recoil and electric starters from freezing up.
Operating Tips
DANGER
When the machine is in operation, the impeller and
auger rotate and can injure or amputate hands or
feet.
Figure 34
Before adjusting, cleaning,  inspecting,
Unclogging the Discharge
Chute
troubleshooting, or repairing the machine, stop
the engine and wait for all moving parts to stop.
Disconnect the wire from the spark plug and
keep it away from the plug to prevent someone
from accidentally starting the engine.
WARNING
If the auger/impeller is running but there is no
snow coming out of the discharge chute, the
discharge chute may be clogged.
•   Remove an obstruction from the discharge
chute; refer to Unclogging the Discharge Chute.
If necessary, use the snow cleanout tool, not
your hands, to remove an obstruction from the
discharge chute.
Never use your hands to clear a clogged discharge
chute. This could result in personal injury.
Stay behind the handles and away from the
To unclog the discharge chute, stay in the operating
position and release the left hand (traction) lever. While
running the auger/impeller, push down on the handles to
raise the front of the machine a few inches (centimeters)
off the pavement. Then lift the handles quickly to bump
the front of the machine on the pavement. Repeat if
necessary until a stream of snow comes out the discharge
chute.
discharge opening while operating the machine.
Keep face, hands, feet, and any other part of
your body or clothing away from concealed,
moving, or rotating parts.
WARNING
If you cannot unclog the discharge chute by bumping
the front of the machine, stop the engine, wait for all
moving parts to stop, and use the snow cleanout tool;
never use your hand.
The impeller can throw stones, toys, and other
foreign objects and cause serious personal injury to
the operator or to bystanders.
Keep the area to be cleared free of all objects
that the auger could pick up and throw.
Important: Unclogging the discharge chute by
bumping the front of the machine on the pavement
may cause the skids to move. Adjust the skids and
tighten the skid bolts securely.
•   Keep all children and pets away from the area
of operation.
Preventing Freeze-up
•    Always set the throttle to the Fast position when throwing
snow.
In snowy and cold conditions, some controls and moving
parts may freeze. Do not use excessive force when
trying to operate frozen controls. If you have difficulty
operating any control or part, start the engine and let it
run for a few minutes.
If the engine slows down under a load or the wheels slip,
shift the machine into a lower gear.
•    If the front of the machine rides up, shift the machine
into a lower gear. If the front continues to ride up, lift up
on the handles.
After using the machine, let the engine run for a few
minutes to prevent moving parts from freezing. Engage
the auger/impeller to clear any remaining snow from
inside the housing. Rotate the Quick Stick to prevent it
18
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number37772
Model Year2015
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 32 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number315000001 - 315999999
Product NamePower Max 826 OE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Power Max
Swath26 inch
DischargeTwo Stage
Engine ManufacturerBriggs & Stratton
Engine Oil Type18 oz. (.54l) 30w or 10w-30 / API SF or higher
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Model #12D1050172F8
Engine Motor Size205cc
Engine Motor Type4 Cycle
Engine Speed3300±100 RPM
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Tire Pressure17-20 PSI / 116-137 kPa
Spark PlugChampion QC12YC
Spark Plug Gap.030"/ .76mm
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website