SERVICE AND MAINTENANCE
12.
13.
Slide the spacer onto the end of the hex shaft.
Align the bearing on the right end of the hex shaft with the hole
in the right side of the frame, then push the hex shaft to the left
into position in the frame.
14.
15.
Slide the bearing onto the left end of the hex shaft and press into
the hole on the left side the frame.
Place the belleville washer (rounded side toward head) onto the
hex screw removed earlier, and insert the screw into the threaded
hole of the hex shaft.
16.
17.
Gradually tighten the hex screw to fully seat the bearings in each
side of the frame and to secure the hex shaft.
Position the frame cover on the bottom of the frame and secure
with the self-tapping screws. Pivot the snow thrower down to it
normal operating position.
Figure 34
Ma inTenanCe SCHeDULe
War ning
Before performing any type of maintenance/service, disengage all
controls and stop the engine. Wait until all moving parts have come to
a complete stop. Disconnect spark plug wire and ground it against the
engine to prevent unintended starting. Always wear safety glasses during
operation or while performing any adjustments or repairs.
Follow the maintenance schedule given below. This chart describes
service guidelines only. Use the Service Log column to keep track of
completed maintenance tasks. To locate the nearest Sears Service
Center or to schedule service, simply contact Sears at
1-800-4-MY-HOME®.
interval
Each Use
item
Service
Service Log
1. Engine oil level
1.
Check
2
3
.
.
Loose or missing hardware
Unit and engine.
2. Tighten or replace
3.
1.
1.
Clean
Change
Change
1st 5 - 8 hours
hours
1. Engine oil
1. Engine oil†
25
2
.
Control linkages and pivots
2. Lube with light oil
50
hours
Annually or 100 hours
Before Storage
1. Engine oil
1. Spark plug
1. Fuel system
1.
Change
1. Clean, replace, re-gap
1. Run engine until it stops from lack of
fuel or add a gasoline additive to the
gas in the tank.
†
Under heavy load or in high temperatures
23
| Categories | Craftsman Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Craftsman 247.88833 |
| Model Number | 247.88833 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Español |
| Product Name | Craftsman 33-Inch Snow Thrower |
| Product Brand | Craftsman. Customer Service Representatives are available by phone: Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Swath | 33 inch |
| Engine Oil Type | SAE 5W30, 4-Cycle Engine Oil (Quart) Recommended for Temperature: - Above 32°F: SAE 30W Straight Grade; - 0°F to 32°F: SAE 5W-30 or SAE 10W-30 Multi Grade; - Below O°F: SAE 0W-30 Synthetic |
| Document File Type | |
| Publisher | craftsman.com |
| Wikipedia's Page | Craftsman (tools) |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)