TROUBLESHOOTING – continued
Symptom
Cause
Solution
No detergent.
Detergent is too thick.
Dilute detergent.
Filter on detergent suction tube is
clogged.
Run warm water through filter to
remove debris.
Damaged or clogged detergent
suction tube.
Remove obstruction or replace
detergent suction tube.
Variopower nozzle is in high
pressure position.
Turn nozzle tip to low pressure
position.
Discharge nozzle is obstructed.
Blow out or remove debris with a
fine needle.
Garden hose
Loose fittings.
Tighten fittings.
connection leaks.
Missing/worn rubber washer.
Insert new washer.
Variopower nozzle leaks.
Variopower nozzle not properly
attached.
Insert the variopower nozzle into
the trigger gun. Carefully press in
against the spring tension and
twist into the locked position.
Broken o-ring or plastic insert.
Pump is sucking air.
Call Customer Service.
12
Pump is noisy.
Check that hoses and fittings are
air tight. Turn off machine and
purge pump by squeezing trigger
gun until a steady flow of water
emerges through the nozzle.
Water leaks from pump (up Loose fittings.
Check that all fittings are tight.
Call Customer Service.
to 10 drops per minute is
permissible).
Water seals are damaged or worn.
Oil seals are damaged or worn.
Oil Drip.
Call Customer Service.
1-800-537-4129
If you encounter any additional difficulties not listed, please call
Customer Service at 1-800-465-4980 for help, or visit www.karcher.ca
| Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
|---|---|
| Tags | Kärcher K 2.89 M |
| Download File |
|
| Language | English, Français, Español |
| Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
| Document File Type | |
| Publisher | karcherresidential.com |
| Wikipedia's Page | Kärcher |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)