IMPORTANT PRECAUTIONS – continued
Water Supply (Cold Water Only)
•
•
•
Water hose must be at least a 1/2 inch or
/8 inch in diameter.
Flow rate of water supply must not fall
below 2 GPM (gallons per minute).
Flow rate can be determined by running the
water for one minute into an empty 5-gallon
container.
The water supply temperature must not
exceed 104°F/40°C.
• Never use the pressure washer to draw in
water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
NOTE: Dirt in the feed water will
damage the unit. To avoid this risk,
we recommend fitting a water filter.
5
• Always prevent debris from being drawn into
the unit by using a clean water source and an
accessory water filter if required.
•
ASSEMBLY INSTRUCTIONS
Step 1
Step 2
Step 3
Insert wheels into side Assemble the handle
holes of the mobile by aligning the holes
adaptor and snap into to the handle posts.
Step 4
Assemble the mobile
adaptor by aligning
the four holes to the
Slide the two handle
posts into the mobile
adaptor and line up
4
machine. Tighten each the holes. Insert two
place.
Insert two of the long
screws and tighten.
of the four short
screws provided.
of the long screws
and tighten.
Step 5
Step 6
Step 7
Assemble the
Place the filter end of
Pull out the locking
detergent container.
detergent suction tube slide from the right
into the detergent
container.
side of the trigger gun
handle.
Insert the small end of
the high pressure
hose into place.
Push the locking slide
back into the trigger
gun to lock the hose
in position.
Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
---|---|
Tags | Kärcher K 2.89 M |
Download File |
|
Language | English, Français, Español |
Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
Document File Type | |
Publisher | karcherresidential.com |
Wikipedia's Page | Kärcher |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)