IMPORTANT PRECAUTIONS – continued
Water Supply (Cold Water Only)
•
•
•
Water hose must be at least a 1/2 inch or
/8 inch in diameter.
Flow rate of water supply must not fall
below 2 GPM (gallons per minute).
Flow rate can be determined by running the
water for one minute into an empty 5-gallon
container.
The water supply temperature must not
exceed 104°F/40°C.
• Never use the pressure washer to draw in
water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
NOTE: Dirt in the feed water will
damage the unit. To avoid this risk,
we recommend fitting a water filter.
5
• Always prevent debris from being drawn into
the unit by using a clean water source and an
accessory water filter if required.
•
ASSEMBLY INSTRUCTIONS
4
Step 1
Step 2
Step 3
Assemble the support leg by
aligning the two holes to the
machine. Tighten each of the
two screws provided.
Slide the two handle posts
into the mobile adaptor and
line up the holes. Insert two
screws and tighten.
Assemble the handle by
aligning the holes to the
handle posts. Insert two
screws and tighten.
Step 4
Step 5
Pull out the locking slide from
Push the locking slide back into
the right side of the trigger gun the trigger gun to lock the hose
handle. Insert the small end of in position.
the high pressure hose into
place.
| Categories | Kärcher Pressure Washer Manuals, Pressure Washer Manuals |
|---|---|
| Tags | Kärcher K 5.50 M |
| Download File |
|
| Language | English, Français, Español |
| Product Brand | Kärcher. Kärcher US Home and garden support phone: 1-800-537-4129 Kärcher international support: http://www.karcher.com/start/choose_your_language.htm, Pressure Washer |
| Document File Type | |
| Publisher | karcherresidential.com |
| Wikipedia's Page | Kärcher |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)