MTD 190-032 101 42-Inch Two Stage Snow Blower Attachment Owners Manual

5
Assembling
Controls
Attaching Chute
Attaching Lift Handle
1.
2.
Attach lift handle to lift bracket on the  right side of
auger housing assembly with two hex screws and two
flange nuts provided. See Fig. 6-3.
Directional Control
1.
1
Attach the chute directional control  assembly to the
upper lift link on the left side of the  auger housing.
Assemble with two hex screws as illustrated in
Figure 6-1. Secure with two flange nuts.
Fasten lift cable to the lift handle with two of the cable
ties provided. Pull cable ties until snug and trim excess.
. Secure the upper  chute crank rod to the joint block
Lift Handle
(A) on the lower chute crank rod with the cotter pin
(B) provided. See Figure 6-2.
3.
Fasten chute tilt cables to chute directional control
with two of the cable ties provided. Pull cable  ties
until snug and trim excess.
Upper Lift Link
NOTE:
Chute Directional
Control Assembly
All references to left
or right side of the
snow thrower is
from the operating
position only.
Auger Housing Assembly
Figure 6-3
Mounting Auger Assembly
WARNING: Before installing
attachment, place tractor  on a firm
and level surface. Place PTO in the
disengaged (OFF) position,  set the
parking brake, shut engine off and remove  key to
prevent unintended starting.
IMPORTANT: If you are installing this snow thrower
attachment on any tractor model with a side  discharge
muffler, See Fig. 6-4, then the heat shield on the auger
housing must be removed. See Fig. 6-5. To remove the
heat shield remove the four lock nuts and bolts (two  on
either side of the unit) securing the heat shield  to the lift
linkage. See Fig. 6-5.
Figure 6-1
B
A
Figure 6-2
Figure 6-4
12
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 24 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated MTD 190-032 101 42-Inch Two Stage Snow Blower Attachment Owners Manual 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

MTD 190-032 101 42-Inch Two Stage Snow Blower Attachment Owners Manual SKU UPC Model
Andy Liviniuk on Dec 06, 2012. MTD 190-032-101 Snow Blower Manual

I was given an incomplete manual. I found this needmanual.com and was very happy to get exactly what I needed. It was simple to download and copy - no fuss no muss - thank you!


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website