MTD Cub Cadet 521E Snow Blower Owners Manual

If additional adjustment is required, follow steps below.  
To adjust, move the extension spring on the end of
the clutch cable to the next higher adjustment
position on the idler bracket assembly. Reassemble
belt cover.
Remove the belt cover by removing five hex screws
that hold it in place. For location of the belt cover,
see Figure 16.
There are three adjustment holes provided in the
idler bracket assembly. For location of these holes,
see Figure 15.
Carburetor
WARNING:  If any adjustments need to be
High Position
Middle Position
made to the engine while the engine is running
(e.g.  carburetor),   keep  clear  of   all  moving
parts. Be  careful of muffler,  engine and other
surrounding heated surfaces.
Idler
Bracket
Low Position
Refer to the separate engine manual, packed with
your unit, for carburetor adjustment information.
Spring on
End of Clutch
Cable
Auger
Pulley
Figure 15
SECTION 6:  MAINTAINING YOUR SNOW THROWER
General Recommendations
Some adjustments will have to be made
periodically to maintain your unit properly. All
adjustments in the Making Adjustments section of
this manual should be checked at least once each
season.
Periodically check  all fasteners and make sure
these are tight
Follow the maintenance schedule given below to
get quality performance from your snow thrower for
a long time.
Always observe safety rules when performing any
maintenance.
The warranty on this snow thrower does not cover
items that have been subjected to operator abuse
or negligence. To receive full value from the
warranty, operator must maintain the snow thrower
as instructed in this manual.
Changing of engine governed speed will void
engine warranty.
Customer Responsibilities
MAINTENANCE SCHEDULE
SERVICE DATES
Lubricate pivot points
Clean snow thrower
Check shave plate adjustment
Check belt
Clean engine
Check spark plug
10
Product Specification
CategoriesCub Cadet Snow Blower Manuals, MTD Snow Blower Manuals, Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website