MTD Cub Cadet 526 WE Snow Blower Owners Manual

Throttle Control
Auger Control
The throttle control is located on  the rear of the
engine. It regulates the speed of the  engine and
will shut off the engine when  moved into the
STOP position.
Primer
Pressing the primer forces fuel directly  into
the engine’s carburetor to aid in cold-weather
starting.
Oil Fill
Engine oil level can be checked and oil added
through the oil fill.
Skid Shoes
The auger control is located on the left  handle. Squeeze the
control grip against the handle to engage  the augers and start
snow throwing action. Release  to stop.
Position the skid shoes based on surface  conditions. Adjust
upward for hard-packed snow. Adjust downward  when
operating on gravel or crushed rock surfaces.
Drive Control / Auger Clutch Lock
Electric Starter Outlet
Requires the use of a three-prong  outdoor extension cord and a
120V
power source/wall outlet.
Recoil Starter Handle
This handle is used to manually start  the engine.
Electric Starter Button
Pressing the electric starter  button engages the engine’s electric
starter when plugged  into a 120V power source.
Augers
When engaged, the augers rotate  and draw snow into the auger
housing.
The drive control is located on the right handle.  Squeeze the
control grip against the handle to engage  the wheel drive.
Release to stop.
Chute Assembly
The drive control also locks the auger  control so that you can
operate the chute directional control  without interrupting
the snow throwing process. If the auger control  is engaged
simultaneously with the drive control,  the operator can release
the auger control (on the left handle) and  the augers will remain
engaged. Release both controls to stop  the augers and wheel
drive.
Snow drawn into the auger housing is discharged out  the chute
assembly.
Gas Cap
Unthread the gas cap to add gasoline to the fuel  tank.
Note: Always release the drive control before changing  speeds.
Failure to do so will result in increased wear on your machine’s
drive system.
sectiOn 4 — cOntrOls  and features
11
Product Specification
CategoriesCub Cadet Snow Blower Manuals, MTD Snow Blower Manuals, Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 24 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website