MTD Cub Cadet 724 WE Snow Blower Owners Manual

Recoil Starter
handle and the snow thrower will move. Release it
and the drive motion will stop.
With engine running, pull starter rope with a rapid,
continuous full arm stroke three or four times.
Pulling the starter rope will produce a loud clattering
sound, which is not harmful to the engine or starter.
Remove the ignition key. Do not turn key.
Disconnect the spark plug wire from the spark plug
to prevent accidental starting while equipment is
unattended.
IMPORTANT: NEVER move shift lever without first
releasing the traction control. Doing so will cause
premature wear to drive system’s friction wheel rubber.
To Engage Augers
To engage the augers and start the snow throwing
action, squeeze the auger control against the left
handle.
NOTE:  Keep  the  ignition  key  in  a  safe  place.  The
engine will not start without the ignition key.
To disengage power to the augers, release both the
auger control and the traction control, if engaged,
Wipe all the snow and moisture from the carburetor
cover in the area of the control levers. Also, move
the  control levers back and forth several times.
NOTE: The auger control can also be locked so you
can    turn    the   chute    directional    control    without
interrupting   the   snow  throwing   process.   Refer   to
Traction Control/ Auger Control Lock in Section 4 of this
manual.
To Engage Drive
NOTE:  Use  the  slower  speeds  until  you  are  familiar
with the operation of the snow thrower.
Tire Chains (Optional Equipment)
With the engine running near top speed, move shift
lever into one of the six FORWARD positions or two
REVERSE positions. Select a speed appropriate
for the snow conditions that exist.
Tire chains should be used whenever extra traction is
needed. See your local Cub Cadet dealer for
information regarding tire chains and other optional
accessories for your snow thrower.
Squeeze the traction control against the right
10
Product Specification
CategoriesCub Cadet Snow Blower Manuals, MTD Snow Blower Manuals, Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website