6
Attaching Ref ectors
Peel off the backing from each of the reflectors to
expose the adhesive surface. Adhere the reflectors to
the rear of the tractor’s fender (one on the left and one
on the right) so that the reflectors simulate taillights.
Mounting
Auger
Housing
Heat Shield
Figure 6-5
IMPORTANT: It will be necessary to have a second
person assist you to complete the following steps.
1.
Installsecureawithshouldera lockboltnut,onaseachseensidein Fig.of the6-7tractor and
Position the auger housing assembly in front of the tractor
as seen in Fig. 6-6. Lay the belt and support tubes on the
installation surface.
WARNING
Shoulder Bolt
2.
Before installing
Figure 6-7
attachment, place
3
. Carefully move the tractor forward (by pushing, NOT
driving it) so that support tubes found on the rear of
the auger housing assembly are positioned between
the tractor’s front tires. Set the parking brake.
tractor on a firm and
level surface. Place
the PTO in the disen-
gaged (OFF) position,
set the parking brake,
shut engine off and
remove key to prevent
unintended starting.
4.
With the help of an assistant, lift up the auger housing
and move it so that it rests over the shoulder bolts
installed in Step 1 of this section. See Fig. 6-7.
Maneuver the auger housing until the mounting holes
line up. Insert the two quick release pins from your
hardware pack into the top hole on each side as seen in
Fig. 6-8.
5.
Attaching Support Tubes
1.
Secure the left support tube to the front of the
undercarriage assembly with the clevis pin and hairpin
clip removed earlier. See Fig. 6-9.
Repeat the previous step on the right side.
Quick Release Pin
Figure 6-8
2.
Belt
Support Tube
Figure 6-6
Figure 6-9
13
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | MTD 190-032, MTD 190-032-101, MTD Snow Blower Manual |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)