Routing the Upper Drive Belt (Tractors Models with an Electric PTO)
Spindle Pulley
Engine Pulley
All electric PTO
Belt
Decks 42, 46, 50, 54
Routing
Various Models
PTO Idler Pulley
Figure 8-1
1.
Attach and route upper drive belt around spindle pulley and idler pulley found on undercarriage, electric PTO
clutch and PTO idler pulley as illustrated in Fig. 8-1. Make sure that the belt is routed to the INSIDE of the belt
keeper on the undercarriage idler pulley and the remaining keeper pins found around the spindle pulley.
IMPORTANT:clutch and spindleMakepulley.certainThisthatallowsthe flattheside“V” ofsidetheofbelttheisbeltfacingto rideoutwardsnuglyasinitbothsits againstpulleys.both the electric PTO
WARNING
Routing the Upper Drive Belt (Tractor Models with a Manual PTO)
Before installing
attachment, place
Spindle Pulley
Engine Pulley
tractor on a firm and
level surface. Place
the PTO in the disen-
gaged (OFF) position,
set the parking brake,
shut engine off and
remove key to prevent
unintended starting.
All Manual PTO
Decks 38, 42, 46
PTO Idler Pulley
Figure 8-2
1.
Attach and route the upper drive belt around the engine pulley and spindle pulley, routed to the INSIDE of the
PTO idler pulley on the undercarriage. Make sure the belt is routed inside of the belt keeper pins found around
the spindle pulley and engine pulley. See Fig. 8-2.
IMPORTANT:
Make certain that the
flat side of the belt is
facing outward. This
allows the “V” side of
the belt to ride snugly
in both pulleys.
IMPORTANT: Be certain flat side of belt is facing outward. This allows “V” side of belt to ride snugly in both pulleys.
Routing the Lower Drive Belt (All Tractors Models)
Left Side
Double-IdlerUndercarriagBrackete
Snow Thrower Drive Pulley
Spindle Pulley
Right Side
Figure 8-3
1.
2.
Attach and route the lower drive belt around the lower pulley on the spindle assembly, both pulleys on the double-
idler bracket found beneath the undercarriage, and the drive pulley found on the rear of the snow thrower housing
as illustrated in Fig. 8-3.
Attach tension spring (found on undercarriage double-idler bracket) to the hex screw if it is not already attached.
14
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | MTD 190-032, MTD 190-032-101, MTD Snow Blower Manual |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)