MTD Troy Bilt Snow Blower Owners Manual

4
Operating
Your Snow
Thrower
KnowYour Snow Thrower
Shift Lever
Drive Control
Heated Handle  Switch(en option)†
Chute Tilt Control
Auger Control
Headlight
Wheel Steering
Control
Chute Assembly
Chute
Directional
Control
Clean-Out Tool
Engine Controls
Choke
Control
Gas Cap
Primer
Oil Fill
Electric Start
WARNING
Button
(optional)
Skid Shoe
Safety
Key
Read, understand,
and follow all instruc-
tions and warnings
on the machine and
in this manual before
operating.
Electric Starter
If Equipped
Outlet
Recoil Starter
Handle
Rocker
Switch
(optional)
Figure 4-1
Now that you have set up your snow thrower for opera-
tion, get acquainted with its controls and features. These
are described below and illustrated on this page. This
knowledge will allow you to use your new equipment to
its fullest potential.
Choke Control
Use extreme care
when handling
The choke control is found on the top of the
engine and is activated by rotating the knob
counter clockwise. Activating the choke
control closes the choke plate on the carbure-
tor and aids in starting the engine.
gasoline. Gasoline is
extremely flammable
and the vapors are
explosive.Never  fuel
the machine indoors
or while the engine
is hot or running.
Extinguish cigarettes,
cigars, pipes and
other sources of
ignition.
NOTE:  For detailed starting  instructions and more
information on all engine controls, refer to the separate
engine manual packed with your unit.
Primer
Depressing the primer forces fuel directly into the engine’s
carburetor to aid in cold-weather starting.
Shift Lever
Oil Fill
The shift lever is located in the center of
6
Engine oil level can be checked and oil added through the
the handle panel and is used to determine
5
oil fill.
ground speed and direction of travel. It can
4
be moved into any of eight positions.
Safety Key
3
2
F  1
The safety key must be pushed in place in order for the
engine to start. Pull the safety key out to prevent unauthor-
ized use of equipment.
IMPORTANT: Always release drive control
before changing speeds.
Forward: The snow thrower has six
forward (F) speeds. Position one (1) is the
Rocker Switch
slowest and position six (6) is the  fastest.
R R1
The rocker switch is used to stop the engine.  The switch
must be in the “ON” position in order to start  the engine.
Reverse: The snow thrower has two
reverse (R) speeds—R1 is the slower of
the two.
R2
10
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, Troy Bilt Snow Blower Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 56 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website