MTD White Outdoor Snow Boss 550 H623D 750 H633E Snow Blower Owners Manual

When cleaning, repairing, or inspecting, make
certain the auger, impeller and all moving parts
have stopped. Disconnect spark plug wire and keep
away from plug to prevent accidental starting.
Do not run engine indoors, except when starting
engine and transporting snow thrower in or out of
building. Open doors. Exhaust fumes are
dangerous.
Do not clear snow across the face of slopes.
Exercise extreme caution when changing direction
on slopes. Do not attempt to clear steep slopes.
Never operate snow thrower without guards, plates,
or other safety protection devices in place.
Never operate snow thrower near glass enclosure,
automobiles, window wells, drop off, etc., without
proper adjustments of snow thrower discharge
angle. Keep children and pets away.
Do not overload machine capacity by attempting to
clear snow at too fast a rate.
Never operate the machine at high transport speeds
on slippery surfaces. Look behind and use care
when backing.
Never direct discharge at bystanders or allow
anyone in front of unit.
Disengage power to collector/impeller when
transporting or not in use.
Use only attachments and accessories approved by
the manufacturer of snow thrower (such as wheel
weights, counter weights, cabs, etc.).
Never operate the snow thrower without good
visibility or light. Always be sure of your footing and
keep a firm hold on the handles. Walk, never run.
Muffler and engine become hot and can cause a
burn. Do not touch.
MAINTENANCE AND STORAGE
Check shear bolts, engine mounting bolts, etc., at
frequent intervals for proper tightness to be sure
equipment is in safe working condition.
Never store the machine with fuel in the fuel tank
inside a building where ignition sources are present,
such as hot water and space heaters, clothes
dryers, and the like. Allow engine to cool before
storing in any enclosure.
Always refer to operators manual instructions for
important details if snow thrower is to be stored for
an extended period.
Run machine a few minutes after throwing snow to
prevent freeze up of collector/impeller. Check clutch
controls periodically to verify they engage and
disengage properly and readjust if necessary. Refer
to operators manual for adjustment instructions.
Your Responsibility
Restrict the use of this power machine to persons who read, understand and follow the warnings and
instructions in this manual and on the machine. Some of the safety labels on the equipment are
reproduced below. Take a moment to study these labels before operating the unit. Always maintain
safety while operating or servicing the equipment.
AWANYG.
FEET
AUGNEGR
FROMJUNIRYD
CLOTANDHI
HANDSKEEP,
ROTATI
WARNING
-
AVOI
1
.  STOP ENGINE BEFORE REMOVING
DEBRIS AND SERVICING  UNIT.
SHUT OFF ENGINE
BEFORE
UNCLOGGING
2.  KEEP CLEAR OF IMPELLER WHILE
ENGINE IS RUNNING.
3
.  NEVER DIRECT DISCHARGE  AT
BYSTANDERS OR  WINDOWS OR
ALLOW ANYONE IN  FRONT OF
UNIT.
DISCHARGE CHUTE.
4
.  THOROUGHLY INSPECT THE  AREA
WHERE THE EQUIPMENT  IS TO BE
USED AND REMOVE  ALL DOOR
DANG
MATS,
ERSLEDS,  BOARDS, WIRES AND
OTHER FOREIGN  OBJECTS.
5
.  REFER TO OWNERS MANUAL FOR
FULL INSTRUCTIONS.
4
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, White Outdoor Snow Blower Manuals
Tags, , , , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website