MTD White Outdoor OGST-3106 Snow Blower Owners Manual

Attaching the Chute Assembly
With the hex nuts loosened on the lower chute
crank bracket (see Figure 5) adjust the bracket so
that the spiral on the chute crank fully engages the
teeth on the chute assembly. Tighten the nuts on
the lower chute crank bracket securely.
NOTE:  Your   chute  assembly  may   or  may  not   be
assembled.  If  it  requires  assembly  use  the  following
instructions.
Chute Directional
Control
Chute Assembly
Hex Screw
Chute
Assembly
Lower Chute
Bracklet
Hex Lock Nut
Chute Flange
Keeper
Lock Nuts
Figure 5
Figure 3
The cable ties normally are loosely installed on
each side of the lower handle at the factory. Pull the
cable ties tight to secure. Trim excess from the
ends of cable ties.
If not already attached, slip the cables that run from
the handle panel to the discharge chute into the
cable guide located on top of the engine.
See Figure 6.
Place chute assembly over chute opening, with the
opening in the chute assembly facing the front of
the unit. Place chute flange keepers beneath lip of
chute assembly, with the flat side of chute flange
keeper facing downward.
Insert hex cap screws up through chute flange
keeper and chute assembly as shown in Figure 3.
Secure with hex flange locknuts. Tighten with two
7/16” wrenches. Do not over tighten.
Cables
Cable
Guide
Attaching Chute Crank
Remove the hairpin clip from the upper chute crank
and slide the upper chute crank through the upper
chute crank bracket and into the lower chute crank.
A pair of pliers may help in this job.
Discharge
Upper Chute Crank
Chute
Figure 6
Wrap the wire from the head lamp down the right
handle until the wire can be plugged into the
alternator lead wire under the fuel tank.
Upper Chute
Crank Bracket
Alternator Lead
Hairpin Clip
Lower Chute Crank
Alternator
Lead
Figure 4
Lamp Wire
Align the two holes on both chute cranks and
secure with the hairpin clip removed earlier. See
Figure 4.
NOTE: Wheels are omitted from illustration for clarity.
Figure 7
6
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, White Outdoor Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 52 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website