•
•
If
the
snow
thrower
should
start
to
vibrate
• Never operate the machine at high transport
speeds on slippery surfaces. Look behind and use
care when backing.
abnormally, stop the engine and check immediately
for the cause. Vibration is generally a warning of
trouble.
•
•
•
Never direct discharge at bystanders or allow
anyone in front of unit.
Stop engine whenever you leave the operating
position, before unclogging the collector/impeller
housing or discharge guide, and making any
repairs, adjustments, or inspections. Never place
your hand in the discharge or collector openings.
Use a stick or wooden broom handle to unclog the
discharge opening.
Disengage
power
to
collector/impeller
when
transporting or not in use.
Use only attachments and accessories approved
by the manufacturer of snow thrower (such as
wheel weights, counter weights, cabs, etc.).
•
•
Never operate the snow thrower without good
visibility or light. Always be sure of your footing and
keep a firm hold on the handles. Walk, never run.
•
•
Take all possible precautions when leaving the unit
unattended. Disengage the collector/impeller, stop
the engine, and remove the key.
Muffler and engine become hot and can cause a
burn. Do not touch.
When cleaning, repairing, or inspecting, make
certain collector/impeller and all moving parts have
stopped. Disconnect spark plug wire and keep
away from plug to prevent accidental starting.
4. MAINTENANCE AND STORAGE
•
Check shear bolts, engine mounting bolts, etc., at
frequent intervals for proper tightness to be sure
equipment is in safe working condition.
•
•
Do not run engine indoors, except when starting
engine and transporting snow thrower in or out of
building.
Open
doors.
Exhaust
fumes
are
•
Never store the machine with fuel in the fuel tank
dangerous.
inside
a building where ignition sources are
Do not clear snow across the face of slopes.
Exercise extreme caution when changing direction
on slopes. Do not attempt to clear steep slopes.
present, such as hot water and space heaters,
clothes dryers, and the like. Allow engine to cool
before storing in any enclosure.
•
•
Never operate snow thrower without guards, plates,
or other safety protection devices in place.
•
Always refer to operator's manual instructions for
important details if snow thrower is to be stored for
an extended period.
Never operate snow thrower near glass enclosure,
automobiles, window wells, drop off, etc., without
proper adjustments of snow thrower discharge
angle. Keep children and pets away.
•
•
Run machine a few minutes after throwing snow to
prevent freeze up of collector/impeller.
Check clutch controls periodically to verify they
engage and disengage properly and readjust if
•
Do not overload machine capacity by attempting to
clear snow at too fast a rate.
necessary.
Refer
to
operator's
manual
for
adjustment instructions.
WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons
who read, understand and follow the warnings and instructions in this manual and on the machine.
WARNING
DANGER
1
. STOP ENGINE BEFORE REMOVING
DEBRIS AND SERVICING UNIT
2. KEEP CLEAR OF IMPELLER WHILE
ENGINE IS RUNNING
3
. NEVER DIRECT DISCHARGE AT
BYSTANDERS OR WINDOWS OR
ALLOW ANYONE IN FRONT OF
UNIT
4
. THOROUGHLY INSPECT THE AREA
WHERE THE EQUIPMENT IS TO BE
USED AND REMOVE ALL DOOR
MATS, SLEDS, BOARDS, WIRES AND
OTHER FOREIGN OBJECTS
AVOIDINJURYFROM
ROTATING AUGER -
KEEP HANDS, FEET
ANDCLOTHINGAWAY.
5. REFER TO OWNERS MANUAL FOR
FULL INSTRUCTIONS
Figure 2 Safety Labels Found on Snow Thrower
4
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals, White Outdoor Snow Blower Manuals |
|---|---|
| Tags | MTD SB1350W, MTD Snow Blower Manual, White Outdoor SB1350W |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)