MTD White Outdoor SB45 SB55 Snow Blower Owners Manual

SECTION3:  KNOWYOURSNOWTHROWER
Read this owner’s manual  and safety rules and labels before operating your snow thrower. Compare the
illustrations in Figure 9 with your equipment to familiarize yourself with the location of various controls and
adjustments. Save this manual for future reference.  
WARNING: The operation of any snow thrower can result in foreign objects being thrown into the
operator’s eyes and causing severe eye damage. Always wear safety glasses while operating the
snow thrower, or while performing any adjustments or repairs on it.
Auger Control
Handle
Upper Handle
Chute Crank
Ignition
Key
Spark
Primer
Button
Plug
Cover
Electric
Starter*
Discharge Chute
Starter
Handle
Choke Lever
Plug for
Electric
Cord*
Off
On
Shave
Plate
Auger
*
Only on electric start models
Figure 9
IMPORTANT: This unit is shipped without gasoline or
oil. See separate engine operator’s manual for proper
fuel and engine oil recommendations.
Choke Lever
Place choke lever in “ON” position to start a cold
engine.
Auger Control Handle
Primer Button
Located on the upper handle, the auger control handle
is used to engage and disengage the augers. The
snow thrower is designed to be propelled by the
rotation of the augers. Pull the control handle back
against the upper handle to engage the augers;
release to disengage.
Used to inject fuel directly into the carburetor to insure
fast starts in cold weather.Follow engine manual to
prime engine.
Ignition Key
Used to start engine. Put key  in “ON” position to start.
Chute Crank
Starter Handle  
Located on right side of dash panel, the chute crank
determines the direction that snow will be discharged.
Turn clockwise to discharge snow to the left; turn
counterclockwise to discharge to the right.
Used to manually start the engine.
Spark Plug Cover
Spark plug located under the cover.
Discharge Chute
Electric Starter (If equipped)
The angle of the discharge chute controls the distance
that the snow is thrown. Tilt the discharge chute up for
greater distance; tilt down for less distance. Loosen
the hand knob on the side of the discharge chute to
adjust. Tilt the chute to the desired position, and
tighten the knob.
This is used to start engine with a 120V power source.
Plug for Electric Start (If equipped)
The electric starter requires use of a two prong
outdoor extension cord and a 120V power source.
7
Product Specification
CategoriesMTD Snow Blower Manuals, Snow Blower Manuals, White Outdoor Snow Blower Manuals
Tags, , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website