If the machine can be moved freely both forward and
rearward when the traction control fully depressed,
proceed as follows:
•
Retighten the jam nut to secure the cable when
correct adjustment is reached.
If you are uncertain that you have reached the correct
adjustment, refer to Traction Control Adjustment in
Adjustment Section.
•
Loosen the jam nut on the traction drive cable and
THREAD the cable in one full turn.
Recheck the adjustment and repeat adjustment as
necessary.
•
SECTION3: KNOWYOURSNOWTHROWER
Traction Control /
Auger Control Lock
Shift Lever
Chute Tilt
Control
Headlight
Auger Drive Control
Closed
Discharge
Chute
Open
Track Steering
Control
Electric
Starter
Button
Primer
Chute Directional
Control
Switch
Box
Choke
Safety
Ignition Key
Recoil
Starter
Handle
Skid Shoe
Auger
Throttle
Control
Figure 7
WARNING: Read, understand, and follow
all instructions and warnings on the
machine and in this manual before
operating.
Release to stop the snow throwing action. (Traction
control must also be released.) See Figure 7.
Chute Tilt Control
The distance snow is thrown can be changed by
adjusting the angle of the chute assembly. Move the
chute tilt control forward to decrease the distance,
toward the rear to increase. See Figure 7.
Traction Control / Auger Control Lock
The traction control is located on the right handle.
Squeeze the traction control to engage the wheel drive.
Release to stop. See Figure 7.
This same lever also locks the auger control so you
can turn the chute directional control without
interrupting the snow throwing process. If the auger
control is engaged along with the traction control, the
operator can release the auger control (on the left
handle) and the augers will remain engaged. Release
the traction control to stop both the augers and track
drive (auger control must also be released).
Skid Shoe
The position of the skid shoe is determined by the
condition of the ground from where snow has to be
removed. See Figure 7.
Chute Directional Control
The chute directional control is located on left side of
the snow thrower. See Figure 7.
IMPORTANT: Always release tractional control before
changing speeds.
To change the direction in which snow is thrown, turn
chute directional control as follows:
Auger Drive Control
The auger drive control is located on the left handle.
Squeeze the control grip to engage the augers.
•
•
Crank clockwise to discharge to the left.
Crank counterclockwise to discharge to the right.
7
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals, White Outdoor Snow Blower Manuals |
|---|---|
| Tags | MTD Snow Blower Manual, MTD Snow Boss 750T, White Outdoor Snow Boss 750T |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)