ASSEMBLY
Your Snowthrower was completely assembled at the factory,
except for the upper handle assembly.
Plastic Strain Relief
Spare Key
Shipping Carton
Carefully remove complete unit from carton. Make sure parts bag
and all components have been removed before discarding
carton.
Plastic Probe
TheS shipping carton contains the following items:
Snowthrower housing, with lower handles attached.
S
Upper handle loosely attached to lower handle by the wire
harness.
Mini Wrench/Drive
Pulley Tool
S
S
S
Key, found in rear of control bar.
Carriage Bolts
Locknuts
Figure 1
Plastic bag, containing the following parts (Figure 1):
Warranty registration
Owner’s Manual
Spare Key
Plastic probe
Mini wrench/drive pulley tool
(2)
(2)
(1)
1/4 – 20 x 1 1/4 carriage bolts
1/4 – 20 locknuts
Plastic Strain Relief
Assembly
Remove and discard wire protector from lower handle tube.
Figure 2.
Plastic Wire
Protector
Lower Handle Tube
Figure 2
NOTE: Care should be given as not to damage wire harness
while assembling Snowthrower.
NOTE: You may find it difficult to slide the upper handle
assembly into the lower handle during initial assembly. This
is due to the close tolerance fit between the upper and lower
tubes, required to ensure a rigid assembly. If this problem
arises proceed as follows:
S
S
S
Place a small amount of grease or oil on the inside of lower
tubes. This will ensure a smooth and even fit when sliding
upper tubes into lower tubes.
Lower Handle
Grip
Fold wire harness, and insert excess wire into lower right
handle tube. Put as much of the wire harness as possible into
lower tube.
Upper Handle
Tube
While holding lower grip firmly, carefully slide the right and left
upper handle tubes into lower handle tubes until holes are
aligned evenly on both sides. DO NOT DAMAGE WIRE
HARNESS. Figure 3.
Lower Handle
Tube
Figure 3
S
Wipe off any excess grease or oil.
F-031061C
4
| Categories | Murray Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Murray 615000X30NA |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)