Regular- Maintenance
LUBRICATION
CHECKING TIRE PRESSURE
The air pressure in each tire should be 20 psi (136
and should be equal for both tires for best
Be sure to keep caps on valves to prevent entry of mois-
ture.
A
It is very important that grease fittings on auger
shaft (figure 6) are lubricated regularly. If auger
rusts to shaft, damage to worm gear may occur if
shear pins do not break.
CAUTION
With an oil can, apply medium weight
oil to points
A
shown in figure 7. There two grease fittings in
the auger shaft (figure 6). Wipe fittings clean and apply
two or three shots of grease. Also, use grease on other
points shown.
Generally, all moving metal parts should be oiled where
contact is made with other parts. Keep oil and grease off
belts and pulleys.
I
Figure 8. Checking Tire Pressure
Transmission
Engine
C. Discharge chute
E. Grease fittings
D. Wheeis
axles
Auger gear case
Auger shaft
A. Use
Add
oil every 10 hours of use and at beginning of each season.
oil as required. Check engine every 5 hours of use and before each use.
C. Remove chute and coat
of flange with clinging type grease annually.
D. Remove wheels and coat axles with clinging type grease annually.
E. Add grease to two grease fittings annually.
7.
Lubrication Points
9
| Categories | Simplicity Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Simplicity 1691411, Simplicity 1691413, Simplicity 1691414, Simplicity 5-55, Simplicity 7-55 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Simplicity, Snow Blower |
| Document File Type | |
| Publisher | simplicitymfg.com |
| Wikipedia's Page | Simplicity Outdoor |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)