English / USA
Mounting the Rotor Blades
The hub of the inner blade is larger
than that of the outer blade.
Take care not to lose the two
washers on the gearbox output
shaft.
:
Rotate the outer right-hand blade
(7) on the shaft until it can be
pushed into position – check the
direction of rotation again (arrows).
:
Arrange the blades in the order they
will be fitted on the shaft, noting the
following points:
Left-hand and right-hand blades are
different. The direction of rotation is
marked with arrows on the gearbox
and blades. Make sure the arrows
point in the same direction.
:
:
Insert and engage the hitch pin (8)
in the hole in the shaft – fold the
hitch pin flat against the blade.
:
:
Line up the gearbox on the drive
tube so that the machine support on
the powerhead points down and the
rotor blades are vertical – parallel to
the deflector.
Use the same procedure to mount
the blades on the left-hand side.
Tighten down the clamp screws (4)
firmly.
Check that the gearbox is secure –
it must not be possible to rotate it on
the drive tube.
Adjusting the Loop Handle
:
Rotate the inner right-hand blade (6)
on the shaft until it can be pushed
into position – check the direction of
rotation again (arrows).
:
Loosen the screws on the loop
handle.
:
See "Mounting the Loop Handle" –
"Aligning and Securing the Loop
Handle"
BF, BK
15
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL BF, STIHL BK |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)