English / USA
MAINTENANCE, REPAIR AND
STORAGE
STIHL may refuse to acknowledge a
warranty claim if the component has
not been handled or serviced
correctly or if unauthorized spare
parts have been used.
! Important!
Only use original spare parts. The use
of parts made by other manufacturers
may cause serious or fatal injuries.
Follow the maintenance and repair
instructions in the appropriate section of
your owner's manual. Refer to the
maintenance chart at the end of this
manual.
The daily maintenance routine set out in
the owner's manual for your power tool
should also be strictly followed.
!
Important!
Avoid cutting close to fences, the sides
! Important!
Check the tightness and condition of the
tool at regular intervals during cutting. If
the behaviour of the tool changes, stop
the engine immediately and examine the
tool. Cracked, bent, warped, damaged
or dull tools must be replaced
of buildings, tree trunks, stones or
similar obstacles which could damage
the blade or lead to loss of control of the
machine. Beware of a higher risk of
ricochets in such conditions. Flying
objects or damaged blades may cause
serious or fatal injuries to the operator
and bystanders. Avoid the roots of
trees! Large roots may jam the blades
and damage the machine. The tree may
also be damaged if its roots are severed.
immediately. Such tools may shatter at
high speeds and cause injuries.
!
Important!
Keep your hands and feet
well clear of the tool.
Never touch a rotating
tool. The tool continues to
run for a short time after
releasing the throttle
If the machine strikes a buried object
(such as a stone), stop the engine and
remove the obstacle. Examine the
machine for signs of damage before
continuing.
Never work with the throttle trigger
interlock engaged, as the engine speed
cannot be controlled properly in this
case. Correct operation of the slide
control is described in the corresponding
chapter of the owner's manual for the
MultiEngine.
trigger (coasting effect).
Major settings
!
Important!
To reduce the risk of injury due to loss of
control or contact with a moving tool,
never operate the machine with
incorrectly set idle speed. The tool
should not move if the idle speed has
been set correctly. Instructions for
adjusting the idle speed can be found in
the appropriate chapter of the owner's
manual for the MultiEngine.
If the implement or deflector is blocked
or covered, always switch off the engine
and ensure that the tool has come to a
standstill before starting to clean it.
Grass, weeds, etc. should be cleaned off
the tool at regular intervals.
If the correct idle speed cannot be set,
have the machine checked and correctly
set or repaired by your STIHL service
dealer.
BF-MM, BK-MM
9
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL BF, STIHL BK, STIHL MM |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)